Assembling The Amego Infinite Electric Bike: Step-By-Step Guide

The Amego Infinite is a popular electric bike with a powerful 500-watt motor and a large 624Wh battery that can take you anywhere. It is designed for comfort, with features such as a suspension front fork, a suspension seat post, and 2 wide tires that ensure a smooth ride even on bumpy roads. When it comes to assembling the Amego Infinite, there are a few options available. The bike can be purchased online and delivered either fully assembled and tested or partially assembled, with the remaining assembly done by the customer. The manufacturer also provides helpful videos and tools to guide customers through the assembly process.

Attaching the pedals

The pedals are one of the only parts of the bike that need to be attached, along with the handlebars and the stem. The bike also comes with a screwdriver and hex keys, which may be useful for other adjustments. The tires also need to be filled with air, but they are not completely flat when the bike is delivered. The bike is well-packaged and protected, so the tires are not likely to have lost much air during shipping.

The Amego Infinite Electric Bike is easy to assemble and can be done independently. The bike is well-protected during shipping, and the necessary tools are included in the package.

Installing the stem and handlebars

First, locate the stem and handlebars in your bike box. The stem is the component that connects the handlebars to the bike frame, while the handlebars are the horizontal bar that you hold onto while riding. Amego Infinite electric bikes come with a "No Tools" adjustable stem, allowing you to adjust the height and angle of the stem without any additional tools.

Next, identify the correct position for the stem. The stem should be inserted into the steering tube, which is located at the top of the fork. Ensure that the stem is inserted to the correct depth, following the manufacturer's guidelines. This will ensure that your bike handles properly and provides a safe riding experience.

Now, you can attach the handlebars to the stem. Handlebars typically have two clamps, one on each side of the stem, that need to be tightened securely. Use the provided wrench or the appropriate tool to tighten the clamps. Make sure the handlebars are aligned correctly and are not twisted or crooked.

Finally, adjust the handlebars to your preferred position. Amego Infinite electric bikes offer adjustability, so you can tilt and rotate the handlebars to find the most comfortable riding position. Ensure that the handlebars are locked securely in place once you've found your preferred position.

By following these steps, you will have successfully installed the stem and handlebars on your Amego Infinite electric bike, bringing you one step closer to enjoying your new ride!

Adjusting and mounting the seat

First, locate the seat post, which is the long, thin tube that extends from the frame of the bike. The seat post should be adjustable, allowing you to raise or lower it to your desired height. Make sure that the seat post is properly secured to the frame, usually with a clamp or quick-release lever. This will ensure that the seat post doesn't slip or move while riding.

Next, carefully place the saddle on the seat post. The saddle is the part of the seat that you will actually sit on, and it should be positioned correctly for a comfortable riding experience. The Amego Infinite features a SelleRoyal gel saddle, designed for maximum comfort on long rides. Adjust the angle and position of the saddle to your preference. You may need to loosen the bolts underneath the saddle to do this, and remember to tighten them securely once you're happy with the position.

The Amego Infinite also features a "No Tools" adjustable stem, which allows you to fine-tune your riding position without the need for additional tools. This is a great feature that enables you to quickly and easily adjust the height and angle of your handlebars, and thus find the perfect position in relation to the seat.

Finally, test your seat setup by taking the bike for a short ride. Make sure you feel comfortable and that your legs are extending fully when pedalling, with only a slight bend at the knee. If any adjustments are needed, make sure the bike is securely propped up, then loosen the relevant bolts, adjust, and tighten again.

Remember, if you feel unsure about assembling the bike yourself, you can always seek professional assistance. The Amego Infinite is a popular bike, and many experienced mechanics are familiar with its assembly and maintenance.

Tuning the derailleur

Step 1: Adjusting the Limit Screws

Locate the two limit screws on your derailleur, often labelled as "H" (high) and "L" (low). These screws set the limits of the derailleur's movement. Turn the "H" screw clockwise to raise the upper limit or counterclockwise to lower it. Similarly, adjust the "L" screw to set the lower limit of the derailleur's movement.

Step 2: Setting the Indexing

The indexing of the derailleur refers to the precise positioning of the chain on the sprockets. To adjust this, use the barrel adjuster, which is usually located near the gear shifters. Turn the barrel adjuster until the chain aligns perfectly with the sprocket. Make sure that the chain shifts smoothly and accurately when you shift gears.

Step 3: Fine-Tuning

Ride your Amego Infinite electric bike and shift through the gears. Pay attention to the smoothness of the shifts and make minor adjustments as needed. Fine-tune the derailleur until you achieve seamless and precise gear shifts. This may require additional adjustments to the limit screws and barrel adjuster.

Step 4: Checking the Cage

Inspect the protective cage around the rear hub. Ensure that it is not obstructing the derailleur's movement. If necessary, carefully bend the cage to provide adequate clearance for the derailleur. This step ensures that the derailleur can move freely and shift gears effectively.

Step 5: Test Ride

After making the necessary adjustments, take your Amego Infinite electric bike for a test ride. Shift through the gears and ensure that the derailleur is functioning optimally. Listen for any unusual noises, and make sure the chain shifts smoothly and accurately. If you notice any issues, repeat the previous steps to make further adjustments.

By following these steps, you can effectively tune the derailleur on your Amego Infinite electric bike, ensuring smooth and precise gear shifts during your rides. Remember to refer to the bike's user manual for additional guidance and always perform adjustments with care to avoid damage.

Attaching the rear rack

The rear rack should come with the necessary hardware for attachment, including bolts, nuts, and washers. Take the provided bolts and secure the rear rack to the frame of the bike. Ensure that the bolts are tightened securely, using the appropriate tools, such as Allen keys or wrenches. It is important to not overtighten the bolts, as this can strip the threads or damage the rack.

Some rear racks may also include additional features such as bungee cords or pannier blockers. If your Amego Infinite rear rack includes these, make sure to attach them securely to the rack as per the manufacturer's instructions. Once the rear rack is securely attached, it is important to test the stability and ensure that it can withstand the weight of your cargo. Place a few items on the rack and take the bike for a short test ride to ensure that the rack is sturdy and does not wobble or shift.

The Amego Infinite electric bike is designed with a frame-mounted rear rack that can hold up to 55 lbs (25 kg) of weight. This rear rack is an essential feature for commuters and urban riders, providing a convenient way to carry items such as groceries, bags, or additional gear.

Frequently asked questions