Beatrice Lang
Philips Norelco recommends replacing the shaving head blades of your electric razor once every 12 months, or every 2 years for optimal performance. To replace the shaving heads, first, disconnect your razor from the power outlet and ensure it is turned off. Next, remove the shaving head holder from the handle of your razor. Depending on the model, you can either press the button on the front of the shaving unit to open it and then lift it off the hinge, or simply pull the shaving head holder off the shaving unit. Then, twist the dial on the retaining frame counterclockwise to unlock it, and lift it. Now, lift the shaving heads out of the holder, and remove the cutters from the guards. Rinse the cutters and guards with warm water, and place each cutter back into its guard. Reinsert the shaving heads with the tops of the guards facing downwards, and put the retaining frame on the shaving heads with the dial facing upwards. Twist the dial to lock the frame in place, and reattach the shaving head holder to your razor.
How to change Norelco electric razor heads
| Characteristics | Values |
|---|---|
| Step 1 | Disconnect the shaver from the power outlet and ensure it is turned off. |
| Step 2 | Remove the shaving head holder from the handle of the shaver. |
| Step 3 | Twist the dial on the retaining frame counterclockwise to unlock it, then lift it. |
| Step 4 | Lift the shaving heads out of the holder. |
| Step 5 | Remove the cutters from the guards. |
| Step 6 | Rinse the cutter and guard with warm water. |
| Step 7 | Place each cutter back into its guard. |
| Step 8 | With the shaving head holder held upside down, reinsert the shaving heads with the tops of the guards facing downwards. |
| Step 9 | Put the retaining ring on top of the shaving head. |
| Step 10 | Twist the retaining rings clockwise to lock the shaving heads in place. |
| Step 11 | Reattach the shaving head holder to the shaver. |
| Additional Notes | Philips Norelco recommends replacing the blades every 12 months. |
Explore related products
What You'll Learn
Disconnect the shaver from the power outlet and turn it off
Before you begin to change the shaving heads of your Philips Norelco electric razor, it is important to disconnect the shaver from the power outlet and turn it off. This is a crucial safety step to prevent any accidental activation of the device during the process.
By unplugging the device, you eliminate the risk of any electrical hazards, such as electric shock, short circuits, or damage to the internal components. It also ensures that the razor is completely powered off, preventing any unexpected movements or rotations of the shaving head. This step is especially important if your razor model has a power switch that may accidentally be activated during the replacement process.
Additionally, disconnecting the power gives you full control over the device, allowing you to work with precision and accuracy without any unexpected movements. It also ensures that you won't trigger the razor's safety mechanisms, which could cause it to shut down or enter a locked state, further complicating the process.
Moreover, working with the device unplugged provides a safer environment for handling the sharp blades and internal components. It eliminates the possibility of accidental activation, reducing the risk of injury. This is crucial, as the blades can be sharp, and proper handling is essential to avoid cuts or nicks during the replacement process.
Always make it a habit to disconnect your electric razor from the power source and turn it off before attempting any maintenance or repair work. This simple step can ensure your safety and make the process of changing razor heads smoother and more efficient.
Electrical Symbols in Excel: Quick Insertion Guide
You may want to see also
Explore related products
Remove the shaving head holder
Before starting, make sure your shaver is disconnected from the power outlet and turned off.
Now, to remove the shaving head holder, first, press the small button beneath the shaving head to open it. Depending on the model, this button may be on the front of the shaving unit. If there is no button, simply pull the shaving head holder off the shaving unit.
Once the shaving head is open, you will be able to see the shaving head holder. Grasp the sides of the shaving head and pull straight up to detach it from the body.
With the shaving head holder removed, you can now lift the shaving heads out of it. After this, remove the cutters from the guards, being careful not to mix them up as each cutter and guard form a unique set.
Rinse the cutters and guards with warm water and place each cutter back into its guard. Now, with the shaving head holder upside down, reinsert the shaving heads, ensuring that the tops of the guards are facing downwards.
The Ultimate Guide to Cutting Wood with Electric Saws
You may want to see also
Explore related products
Lift the shaving heads out
To lift the shaving heads out of the shaving head holder, you must first disconnect your shaver from the power outlet and ensure it is turned off. Depending on the model of your Philips shaver, you can either press the button on the front of the shaving unit to open it and then lift it off the hinge, or simply pull the shaving head holder off the shaving unit.
Once you have removed the shaving head holder, you can then lift the shaving heads out. Be sure to remove the cutters from the guards, as each cutter and guard form a unique set, so avoid mixing them up. Rinse the cutter and guard with warm water, then place each cutter back into its guard.
With the shaving head holder held upside down, reinsert the shaving heads with the tops of the guards facing downwards. Put the retaining ring on top of the shaving head. The small protrusions you use to grip and twist the rings should face upwards. Twist the retaining rings clockwise to lock the shaving heads in place.
Finally, reattach the shaving head holder to your shaver. If you have cleaned your shaving heads, let them air dry before your next shave.
Adjusting Your WEN Electric Chainsaw: A Step-by-Step Guide
You may want to see also
Explore related products
Rinse and dry the cutter and guard
Rinsing and drying the cutter and guard of your Philips shaver is an important part of keeping your electric razor in good condition. Here is a detailed, step-by-step guide to doing this:
Firstly, it is important to note that while most Philips shaver models are waterproof, some are not. Therefore, before proceeding, refer to your user manual or look for a small symbol on the shaver handle, such as a tap or bathtub/shower icon, to ensure your model is waterproof.
If your Philips shaver is waterproof, rinsing the cutter and guard is a straightforward process. Start by removing the cutters from the guards, being careful not to mix them up as each cutter and guard form a unique set. Then, simply rinse both the cutter and the guard with warm water.
After rinsing, place each cutter back into its corresponding guard. Ensure that the tops of the guards are facing downwards when reinserting the shaving heads into the shaving head holder.
Finally, allow the shaving heads to air dry completely before using your Philips shaver again. This step is crucial to prevent any moisture-related issues and to ensure a comfortable and effective shave.
By following these instructions, you can help maintain the performance and longevity of your Philips shaver.
Converting Voltage: Transforming 110V to 240V Electricity Safely
You may want to see also
Explore related products
Reinsert the shaving heads
Reinserting the shaving heads is a simple process. Firstly, ensure the shaving head holder is upside down. Then, reinsert the shaving heads with the tops of the guards facing downwards. Place the retaining ring on top of the shaving head, with the small protrusions used to grip and twist the ring facing upwards. Twist the retaining ring clockwise to lock the shaving heads in place. Finally, reattach the shaving head holder to your shaver.
If you are reinserting the shaving heads after cleaning, make sure they are completely dry before reattaching them and using the shaver.
If you are reinserting new shaving heads, you can skip the above steps and follow the below instructions: Push the new shaving head back onto the body of the shaver, then close it. Check that the new head is aligned correctly in the setting.
Now your shaver is ready to use!
Mastering La Grange: Electric Guitar Techniques
You may want to see also
Frequently asked questions
It is recommended that you replace the shaving head blades of your Norelco electric razor every 12 months for optimal performance.
First, disconnect your razor from the power outlet and ensure it is turned off. Next, press the release button to open the shaver. Then, twist the retaining ring counter-clockwise to unlock it, and finally, lift the shaving head out of the holder.
First, remove the old shaving head. Then, insert the new shaving head, ensuring that the tops of the guards are facing downwards. Finally, put the retaining ring on top of the shaving head and twist it clockwise to lock the shaving head in place.
First, remove the shaving head holder from the shaving unit. Then, remove the cutters from the guards, and rinse each cutter and guard with warm water. Finally, place each cutter back into its guard, and reinsert the shaving heads into the shaving head holder.
