Wiktor Wise
The iPoint electric pencil sharpener is a handy tool for teachers, parents, and anyone else who regularly uses a pencil. However, it can be frustrating when it gets jammed or needs to be emptied. To empty the iPoint electric pencil sharpener, hold the base of the sharpener in one hand and twist the reservoir cap counterclockwise until it comes off. Then, dump out the shavings and replace the lid. If your sharpener is jammed, first put on some gloves to avoid getting pencil lead on your hands. Next, take a picture of the sharpening chamber to remember how the insides sit in the outer plastic case. Finally, gently slide out the sharpening chamber and remove any obstructions with a screwdriver or knife.
Explore related products
What You'll Learn
Remove the top lid
To remove the top lid of your iPoint electric pencil sharpener, start by holding the base of the sharpener with one hand. With your other hand, twist the top lid counterclockwise. You may need to apply some force to twist it, but it should come off eventually. If it seems stuck, try jiggling it gently or using a rubber glove for a better grip.
Once the lid is removed, you will have access to the inner mechanism of the sharpener. Be careful when handling the sharp blades. If your sharpener is jammed, you may need to remove the sharpening chamber to access the jammed object. Remember to take pictures of the inner mechanism before disassembling it further, as it will be helpful when reassembling the sharpener.
Some users have reported that the top of the iPoint sharpener consists of two pieces. The first is a thin lid that you can twist and remove to empty the shavings. If you want to clear the blades of shavings completely, you can remove the longer part that sits below the thin lid. Make sure to fit both pieces together properly when reassembling, or the sharpener will not work.
If you encounter a jammed sharpener, you can try to remove the object causing the jam. First, grip the insides of the sharpener gently and slide out the sharpening chamber. Be cautious, as some sharpeners have blades that are very sharp. You can use a screwdriver to remove any screws holding the sharpening chamber in place. Once the chamber is removed, you should be able to access and remove the jammed object. Additionally, if you have a jammed sharpener due to broken lead, you can try using a long sharp needle or a straightened paper clip to dislodge the broken lead.
Air's Role in Electricity Transmission and its Applications
You may want to see also
Explore related products
Empty shavings reservoir
To empty the shavings reservoir of your iPoint electric pencil sharpener, follow these steps:
- Hold the base of the sharpener firmly in one hand.
- With your other hand, twist the top of the sharpener, which is the reservoir cap, in a counterclockwise direction.
- Continue twisting until the cap comes off completely.
- Once the cap is removed, simply dump out the pencil shavings from the reservoir.
It is important to note that the iPoint sharpener has two pieces at the top that can be removed. The first is a thin lid that can be twisted off to empty the shavings reservoir. However, if you want to clear the blades of shavings completely, you will need to remove the longer part beneath the lid. Remember to properly fit both pieces back together, as the sharpener will not function if they are not correctly assembled.
Electricity Costs: Month-to-Month Comparison and Insights
You may want to see also
Explore related products
Clean blades
To clean the blades of your iPoint electric pencil sharpener, you must first remove any pencil lead from the grooves of the sharpener. Put on some gloves to avoid getting pencil lead on your hands. Then, gently slide out the sharpening chamber from the outer plastic casing. Some sharpeners may have an extra covering over the blades that needs to be unscrewed with a screwdriver.
Once the blades are exposed, use a long-necked screwdriver to carefully dislodge any built-up pencil lead or debris from the blades. Be cautious not to cut yourself on the sharp blades. If there is stubborn residue, use a knife to gently scrape it away, but be careful not to force it and damage the blades.
After cleaning, remember to take reference pictures of the blades and the surrounding area before putting everything back together. Reattach the blade covering, if any, by screwing it back in place. Then, slide the sharpening chamber back into the outer plastic casing, ensuring that the grooves align correctly.
Finally, plug in the pencil sharpener and test it out to ensure it is functioning properly. With regular cleaning and maintenance, your iPoint electric pencil sharpener's blades will stay sharp and efficient.
Electrical Fire: Can You Smell the Danger?
You may want to see also
Explore related products
Reassemble correctly
To reassemble your iPoint electric pencil sharpener, follow these steps:
Firstly, ensure that you have thoroughly cleaned the shavings reservoir and removed any built-up pencil shavings or debris. Check that the reservoir cap is correctly aligned and twist it clockwise to secure it tightly.
Next, carefully examine the sharpener's internal components. Refer to the pictures you took before disassembling the sharpener to ensure that you remember how the insides should be arranged. Gently slide the sharpening chamber back into the outer plastic casing. There should be grooves to guide the chamber into place.
Once the sharpening chamber is correctly positioned, reattach the bottom cover. Secure it in place by screwing it tightly. Then, stick the foot pads back over the screw holes. If the adhesive on the foot pads has worn off, use a small amount of superglue to secure them in place.
Finally, ensure that the power cord is properly connected and plugged into a power source. Check that the flexible plastic part of the cord is seated correctly in its groove on the casing. Once you have completed these steps, your iPoint electric pencil sharpener should be fully reassembled and ready for use.
The Best Storage Methods to Keep Your Electric Shaver in Top Shape
You may want to see also
Explore related products
Fix a jam
To fix a jam in your iPoint electric pencil sharpener, you will first need to remove the sharpening chamber. It is recommended that you take a picture of the insides of the sharpener before you begin, so you have a reference for putting it back together. Most sharpeners can be easily slid out from the outer plastic casing by gripping the insides and gently sliding them out.
Some sharpeners may have an extra covering screwed around the sharpening blades. If this is the case, use a screwdriver to remove it, and remember to take a picture of the screws and cover before you remove them. Be careful not to cut yourself on the sharp blades!
Once you have removed the cover, you should be able to access the jammed object. Try to extract it by pulling it out with your fingers, turning the sharpener upside down and shaking it, or using a knife or screwdriver to gently pry it out. You can also try using a long sharp needle or a straightened paper clip to dislodge the blockage. If the jam is particularly stubborn, a small pick can be used to remove the blockage.
Once the jammed object has been removed, remember to put the sharpener back together correctly. Refer to your pictures to ensure that the insides are correctly placed within the outer plastic case. If you have removed any screws, ensure that they are replaced before sticking the footpads back over the holes. Plug your sharpener back in and test it out!
Electricity Cut-Off: How and Why Power Companies Do It
You may want to see also
Frequently asked questions
Hold the base of the sharpener in one hand and twist the reservoir cap counterclockwise until it comes off. Dump out the shavings and replace the lid.
Empty the sharpener once the shavings inside the shavings reservoir reach midway.
First, put on some gloves to avoid getting pencil lead on your hands. Then, remove the power cord and take a picture of the sharpening chamber before removing it from the outer plastic case. Gently slide out the sharpening chamber and use a screwdriver to remove any extra coverings or screws. Finally, extract the jammed object by pulling it out, turning the sharpener upside down and shaking, or using a knife or screwdriver to gently pry it out.
Remove the power cord and loosen the (donut) cap and remove the shavings collector. Hold down the drill-like part that rotates and sharpens the pencil, and simultaneously use a long, sharp needle or straightened paper clip to jiggle the broken lead until it loosens up.
