A Simple Guide To Installing Fenders On Your Electra Townie

how to install fenders on electra townie bike

Installing fenders on an Electra Townie bike can be a challenging task, especially since the product often comes with a bag of parts and no instructions. However, with some careful consideration and a bit of creativity, it is possible to successfully install fenders and improve the functionality and aesthetics of the bike. In this article, we will explore the steps involved in installing fenders on an Electra Townie, including the importance of proper mounting, cutting down protruding ends, and securing loose bolts. By following these guidelines, you can enhance your riding experience and ensure that your bike is equipped with the necessary protection from the elements.

shunzap

How to install fenders on an Electra Townie bike without instructions

Fenders can be installed on an Electra Townie bike without instructions, but it may be challenging. The fenders come with a little bag of parts and no instructions, so it may be difficult to know how to put them together. However, it is possible to figure it out by trial and error.

One user suggested that the fenders should not be mounted on the outside. Instead, they should be mounted in a way that cuts down the "thigh slicers" so they just stick out a bit. It's worth noting that Electra is unlikely to recommend cutting them off and using a grinder. When snipping the little ends, they can fly off, so be careful! Additionally, the aluminium fenders don't fit some of the Townie bikes.

Another user shared their experience of installing fenders on their wife's Electra Townie. They mentioned that the fender stays were wrapped up in the packaging, making it challenging to understand the design. They assembled the parts based on their intuition. This user also contacted Electra and received a helpful response with detailed instructions and photographs.

A third user provided some additional insights. They mentioned that it's important to know the model and year of the Townie bike, as there are different versions. They also suggested using locktight on the inner fender frame/fork bolts to prevent them from coming loose.

Overall, while it may be challenging, it is possible to install fenders on an Electra Townie bike without instructions. By reaching out to Electra and other users, as well as through trial and error, you can successfully install the fenders.

shunzap

Where to mount fenders on an Electra Townie bike

Electra Townie bikes do not come with fenders, but they can be purchased separately and installed.

Fenders can be mounted on the inside or the outside of the bike. However, it is recommended to mount them on the inside to avoid 'thigh slicers'. If you mount them on the outside, you will need to cut them down so they don't stick out.

It is important to note that the aluminium fenders may not fit all Townie bike models, so it is worth checking this before purchasing.

To install the fenders, you will need to follow the instructions provided by Electra. These include detailed instructions and photographs. It is recommended to use locktight on the inner fender frame/fork bolts as they can come loose.

shunzap

How to cut fender stays on an Electra Townie bike

To cut fender stays on an Electra Townie bike, you will need to mount the fenders first. Do not mount them on the outside. Instead, mount them so that they are sticking out a bit, and cut down the "thigh slicers". You can use a grinder to do this, but be aware that the little ends may go flying off. Once you have cut the fender stays to the desired length, put the supplied caps on the ends of the stays.

If you are unsure about how to install the fenders, you can email Electra for instructions and pictures. They will send you detailed instructions and several photographs.

It is also important to note that the model and year of your Townie bike may affect how you install the fenders. For example, if your bike is a 2007 model, you may need to put some locktight on the inner fender frame/fork bolts as they can come loose pretty often.

shunzap

How to avoid 'thigh slicers' when installing fenders on an Electra Townie bike

To avoid thigh slicers when installing fenders on an Electra Townie bike, it is recommended that you mount the fenders on the inside, rather than the outside. You can then cut the thigh slicers down so they just stick out a bit. However, Electra is not likely to advise you to cut them off and use a grinder. When you snip the little ends, they can fly off into space. It is also worth noting that the aluminium fenders don't fit some of the Townie bikes.

If you contact Electra, they will send you helpful instructions and pictures. You can also put the supplied caps on the ends of the stays. Make sure to put some locktight on the inner fender frame/fork bolts as they can come loose.

shunzap

What to do if the fenders don't fit your Electra Townie bike

If the fenders don't fit your Electra Townie bike, there are a few things you can try. Firstly, check that you have the correct model and year of the Townie bike, as there are a few different models and the fenders may not fit all of them. For example, the fenders may not fit some of the older models.

If you have the correct model and year, try contacting Electra customer support. They have been known to respond quickly with detailed instructions and photographs to help with installation. You can also suggest that they put together some kind of instructions for future customers, as it's not always obvious how the fenders are supposed to go.

If the fenders still don't fit, you may need to make some adjustments. One option is to cut down the fenders so they don't stick out. You can then put the supplied caps on the ends of the stays. However, keep in mind that Electra is not going to tell you to cut them off, and you'll need to use a grinder! When you snip the little ends, they can go flying off into space.

Finally, make sure you have all the necessary parts. The fenders should come with a little bag of parts, but sometimes the fender stays are wrapped up in the packaging and you can't see how they're designed until you open it. Put things together as they make sense to you, and don't mount the fenders on the outside!

Frequently asked questions

Electra Townie fenders don't come with instructions, but you can contact Electra for detailed instructions and photographs. You can also find advice on bicycle forums.

You can cut them down so they don't stick out. However, Electra is not going to tell you to cut them off and use a grinder.

Make sure to put some locktight on the inner fender frame/fork bolts.

You can put things together as it makes sense to you.

You can't tell by looking at the packaging until you open it.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment