Molly Ayala
Electric shavers can be costly, so it's important to maintain them properly to ensure they last as long as possible. Lubricating your electric shaver is a key part of this maintenance, helping to reduce friction between the blades and foil, decrease heat, and protect the blades from rust. Braun electric shavers can be lubricated using a light mineral oil, such as hair clipper oil or the brand's own lube oil. It is important to ensure the shaver is completely dry before applying oil and to only use a small amount to avoid dripping or causing rust.
How to lubricate a Braun electric shaver
| Characteristics | Values |
|---|---|
| Frequency of lubrication | Every 3 months |
| When to lubricate | When the shaver is loud and shaky, the motor runs sluggishly, it gives a poor shave or hurts |
| When not to lubricate | When using a cleaning station or cleaning the shaver with alcohol |
| Type of lubricant | Light mineral oil, hair clipper oil, sewing machine oil, light machine oil, natural face oil, preshave lotion, light oil such as trumpet valve oil, Wahl clipper care sprays, mineral oil |
| How much lubricant to use | Three drops of oil, one in the middle and one on each corner |
| How to apply the lubricant | Apply while the shaver is running and then let it run for a few seconds to allow the oil to work into the gears |
| How to clean the shaver | Rinse under running hot water, use a bit of standard liquid soap, clean the cutter block with a brush, switch the shaver on for 2-3 seconds |
Explore related products
What You'll Learn
Cleaning your Braun electric shaver
After removing the cutter head, you can clean the cutter block with a brush. Braun advises that you should never clean the cutter foil with a brush. You can also use a cleaning spray to remove all traces of sebum and other residues. Braun also recommends replacing the cutters and screens every 18 months.
If you shave wet, Braun suggests that you lubricate your shaver to prevent corrosion of the screen and cutters. You should only use a small drop or two of light machine oil, such as hair clipper oil, on the screens. If you clean and dry your shaver with a brush, you do not need to lubricate it. You should also ensure that your shaver is completely dry before applying oil.
Release Your Electric Parking Brake: Here's a Simple Guide
You may want to see also
Explore related products
Choosing the right lubricant
Lubricating your Braun electric shaver is essential for optimal performance and longevity. The right lubricant will reduce friction, minimise wear and tear, and provide a more comfortable shaving experience. Here are some factors to consider when choosing the right lubricant for your Braun electric shaver:
Type of Lubricant
The most common types of lubricants for electric shavers are oils and sprays. Light mineral oils, such as hair clipper oil, are widely recommended. These include brands like Wahl and Oster Blade Lube, which are effective and inexpensive options. You can also use a few drops of light machine oil or sewing machine oil, although the former is preferred to avoid potential skin reactions. Additionally, some manufacturers, including Braun, may provide a small bottle of their own lubricant, which is typically a highly refined mineral or paraffin oil.
Spray lubricants, such as the Braun Shaver Cleaner or the SP-4 from Remington, offer the dual benefit of lubrication and cleaning. They are convenient for wet shaving and can effectively minimise friction and wear, resulting in improved shaver performance.
Frequency of Use and Shaving Method
The frequency with which you lubricate your Braun electric shaver depends on how often you use it and your cleaning method. If you shave dry, mineral oil and warm water are typically sufficient for lubrication and cleaning. Oiling your shaver after each dry shave is ideal, but a minimum of twice a week is recommended.
If you wet shave, the water and shaving cream can act as a lubricant, so additional lubrication may not be necessary. However, if you plan to use the shaver dry after wet shaving, it is essential to let it dry completely before the next use and then apply lubricant.
Compatibility and Safety
When choosing a lubricant, ensure it is compatible with your Braun electric shaver model. Some lubricants are specifically designed for certain shaver types, like hair clippers, so check the manufacturer's instructions or recommendations for your particular model. Additionally, consider any skin sensitivities you may have and opt for lubricants that are safe and non-irritating for your skin.
Temperature Resistance
Look for a lubricant that can withstand both low and high temperatures. This is important as it ensures the lubricant's effectiveness and performance regardless of the temperature conditions in which you use your Braun electric shaver.
Electric Bills: Who Pays, Landlord or Tenant?
You may want to see also
Explore related products
How much lubricant to use
The amount of lubricant you need to use on your Braun electric shaver depends on the type of lubricant and the state of your shaver.
If you are using a light mineral oil, such as hair clipper oil, a small drop or two on the top mid of the foils is sufficient. You can also use the spray lubricant, which is a practical way of cleaning and lubricating your shaver. If you are using a light machine oil, place a small amount on the screen.
It is important to note that your shaver should be completely dry before applying any lubricant. If you clean your shaver with soap and water, you can put a drop of clipper oil on the foil and the two trimmers. If you use a cleaning station with your electric razor, additional lubrication is not necessary as the solutions used for cleaning also act as a lubricant.
By lubricating your electric shaver, you will reduce friction between the blades and foil, decrease heat generation, and protect the blades from rust and corrosion.
Electric Sheep Thesis: Androids, Dreams, and Human Nature
You may want to see also
Explore related products
Where to apply the lubricant
Lubricating your Braun electric shaver is important for maintaining optimal performance and extending its lifespan. Here are the key areas where you should apply the lubricant:
The Blades
The blades of your electric shaver are in constant contact with your skin and hair, making them prone to wear and tear. Apply a small amount of light machine oil or clipper oil directly onto the blades. This will help reduce friction, keep them sharp, and protect against corrosion.
The Cutter Block or Head
The cutter block or head is another crucial area to lubricate. Place a drop or two of light machine oil on the cutter block. This will help keep the cutters in good condition and ensure a smooth shaving experience.
The Screens or Foils
If you use your Braun electric shaver for wet shaving, it is essential to lubricate the screens or foils. A couple of drops of light machine oil on the screens will do the trick. This helps prevent corrosion from water while the head cassette dries.
The Trimmer
The trimmer area of your electric shaver can also benefit from lubrication. Apply a light machine oil or sewing machine oil to the trimmer to ensure smooth performance and protect against friction.
The Internal Mechanisms
In addition to the external parts, it is important to lubricate the internal mechanisms of your Braun electric shaver. While you may not be able to access all internal components, you can ensure overall lubrication by running the device for a few seconds after applying oil to the external parts.
Remember to always clean your Braun electric shaver before lubricating and follow the manufacturer's instructions for optimal care and maintenance.
Dehydrating Food: Ancient Techniques Before Electricity
You may want to see also
Explore related products
How often to lubricate
The frequency with which you should lubricate your Braun electric shaver depends on several factors, including the model, usage, and cleaning method. Braun shavers with a cleaning station, for example, do not require additional lubrication as the cleaning station takes care of it.
If you manually clean your Braun electric shaver, the lubrication frequency will depend on how often you use it and whether you shave dry or wet. For dry shaving, Braun recommends lubricating the shaver with a couple of drops of light machine oil or mineral oil to prevent corrosion of the screen and cutters. This should be done after cleaning the shaver by brushing out the clippings and before using it again.
For wet shaving, Braun recommends lubricating the shaver with a couple of drops of light machine oil or mineral oil after shaving and before allowing it to dry. This helps to prevent corrosion while the head cassette dries.
In general, it is recommended to lubricate your electric shaver when it becomes loud and shaky, the motor runs sluggishly, or it starts to give you a poor shave or skin irritation. Lubrication helps to reduce friction between the blades and foil, decreasing heat generation and improving shaving comfort. It also prolongs the life of the foils and blades, reducing the need for frequent replacements.
Additionally, Braun recommends replacing the cutters and screens every 18 months or when the shaves become less close or comfortable. Proper lubrication can help extend the time between replacements.
Understanding Switch Legs: Electrical Wiring Basics
You may want to see also
Frequently asked questions
Lubricating your Braun electric shaver will help to reduce friction between the blades and foil, decrease heat, and extend the life of the blades and foils.
How often you lubricate your Braun electric shaver depends on how often you use it and how thick or long your beard is. If you rinse your shaver every time you use it, you might not need to deep clean or lubricate it as often.
Braun recommends using a light machine oil or mineral oil on the cutter block, screens, and trimmer. You can also use hair clipper oil or sewing machine oil. Avoid using heavy oils such as WD-40.
First, make sure your shaver is completely dry. Then, apply a small amount of light machine oil or mineral oil to the cutter block, screens, and trimmer. You can also put a drop of oil on the foil or cutter head. Finally, turn on the shaver and let it run for a few seconds to allow the oil to work into the gears.
No, if your Braun electric shaver has a cleaning station, you do not need to lubricate it separately as the cleaning station will take care of lubrication.
