Molly Ayala
Electric blankets are a great way to keep warm, but they can be tricky to clean. Sunbeam® Heated Bedding products are machine washable and dryer-safe, but it's important to take some precautions to avoid damaging the wiring. Before washing, it's recommended to presoak the blanket in mild soap and cold water for 15 minutes, then wash it in cold water on a delicate or gentle cycle. Electric blanket cords should be removed to prevent damage, and users should always refer to the manufacturer's care instructions. While some blankets can be tumble-dried, others recommend air-drying to prevent damage to the wiring.
| Characteristics | Values |
|---|---|
| Presoak | 15 minutes in cold water and mild soap |
| Wash | Cold water and mild soap on delicate/gentle cycle for 2 minutes |
| Bleach | Avoid |
| Rinse | Fresh, cold water |
| Spin dry | In the washing machine |
| Machine drying | Low temperature setting for 2 minutes |
| Tumble dry | 10-15 minutes at a low temperature |
| Dry | Remove while still damp, reshape it, and drape over a clothesline or shower rod |
| Iron | Avoid |
| Dry clean | Avoid |
| Commercial dryers | Avoid |
| Wash frequency | Depends on usage |
Explore related products
What You'll Learn
Pre-soak the blanket in cold water and mild soap
Before machine washing your Sunbeam electric blanket, it's important to pre-soak it in cold water and mild soap. This process helps to gently clean the blanket and remove any dirt or stains. Here's a step-by-step guide to effectively pre-soak your electric blanket:
First, fill a tub or a large container with cold water. Make sure the water is cold, as hot water can damage the electric blanket's wiring and components. Add a mild soap or detergent to the water. Avoid using bleach or harsh chemicals, as they can also damage the blanket.
Next, submerge the electric blanket completely in the soapy water. Use your hands to gently agitate the blanket, similar to how a washing machine agitates. You can also gently rub or squeeze the blanket to help remove any stains or dirt. Let the blanket soak for at least 15 minutes. This duration allows the soap and water to penetrate the fabric and effectively remove any odours or stains.
After the soak, drain the soapy water and refill the tub with fresh, cold water. Agitate the blanket again to rinse away any remaining soap. Repeat this rinsing process until all soap residue is removed from the blanket.
Finally, gently squeeze the blanket to remove excess water. Do not wring or twist the blanket, as this can damage the internal wiring. You can lay the blanket flat between two towels to absorb excess moisture, or you can carefully hang it to dry. Make sure the blanket is completely dry before using it or storing it away.
By following these steps, you can effectively pre-soak your Sunbeam electric blanket in cold water and mild soap, ensuring it is clean and well-maintained. Remember to always refer to the care instructions provided by the manufacturer for any additional guidelines specific to your electric blanket model.
Electric Toothbrushes: FSA-Eligible With a Prescription?
You may want to see also
Explore related products
Wash on a delicate or gentle cycle
To machine wash a Sunbeam electric blanket, it is recommended to wash it on a delicate or gentle cycle. This is because washing on a delicate or gentle cycle helps to eliminate dislodging or damaging the wiring inside the blanket.
Firstly, it is important to presoak the blanket for 15 minutes in mild soap and cold water. Then, wash the blanket in mild soap and cold water on the delicate or gentle cycle in the washer for two minutes. Do not use bleach. Make sure to rinse the blanket in fresh, cold water.
After rinsing, spin-dry the blanket in the washing machine. Then, gently shape it to its original size. It is important to note that you should not use commercial dryers or dryers at your local laundromat as they get too hot and can damage the wiring of your heated blanket. Instead, preheat your dryer at home on the "low" temperature setting for 2 minutes, and then tumble dry the blanket for 10 minutes at a low temperature.
Finally, remove the blanket from the dryer while it is still damp and gently shape it to its original size. You can then finish drying it by draping it over a clothesline or a shower rod.
Electric Meters: Do They Offer Digital Surge Protection?
You may want to see also
Explore related products
Rinse in cold water
Rinsing your Sunbeam electric blanket in cold water is an important step in the machine washing process. It ensures that all soap residue is removed from the blanket, preventing any skin irritation or product damage that could be caused by soap buildup.
To begin the rinsing process, drain the tub or sink of the soapy water used during the soaking and washing steps. Then, refill it with fresh, clean cold water. It is important to use cold water as it is gentler on the blanket's fabric and electrical components. Agitate the blanket in the water with your hands, similar to how a washing machine agitates, ensuring that the water reaches all parts of the blanket.
Repeat the rinsing process as many times as needed to ensure that all soap is removed from the blanket. You may need to drain and refill the tub multiple times to achieve a thorough rinse. After the final rinse, gently squeeze the blanket to remove excess water. Avoid twisting or wringing out the blanket, as this can damage the internal wiring.
If your machine has a spin cycle, you can use it to remove excess water from the blanket. Place the blanket in the washing machine and select the spin cycle, making sure to set it to a low speed to avoid damaging the blanket. Once the spin cycle is complete, your electric blanket will be ready for the drying process.
By following these steps and rinsing your Sunbeam electric blanket thoroughly in cold water, you can help ensure that your blanket is clean, safe, and functioning properly.
Are Hi-Lo Drinking Fountains Electric-Powered?
You may want to see also
Explore related products
Spin dry in the washing machine
Sunbeam® Heated Bedding products are washing machine and dryer safe, but it is important to follow the correct procedure to avoid damaging the blanket.
To spin dry your Sunbeam electric blanket in the washing machine, follow these steps:
- Before spinning dry, ensure that you have presoaked the blanket for 15 minutes in mild soap and cold water, and then washed it in cold water and mild soap on the delicate or gentle cycle for two minutes.
- Rinse the blanket in fresh, cold water before proceeding to the spin dry cycle.
- Select the spin dry setting on your washing machine. Most machines will have a specific setting for spinning, which will remove excess water from the blanket.
- If your machine does not have a dedicated spin dry setting, you may need to select a regular wash cycle and let it run until the spin cycle is complete. Stop the machine once the spinning is done and before the wash cycle begins again.
- After spinning, gently reshape the blanket to its original size. It is important not to wring or twist the blanket, as this may damage the internal wiring.
- If possible, avoid using commercial dryers or high heat settings as they can damage the wiring of your heated blanket. Instead, consider air drying or tumble drying on a low setting for a short period.
Remember to always refer to the care instructions provided by the manufacturer and follow any specific guidelines or precautions indicated.
Lighting an Electric Fireplace: A Step-by-Step Guide
You may want to see also
Explore related products
Tumble dry on a low heat setting
Tumble drying your Sunbeam electric blanket is a straightforward process, but it's important to follow the correct procedure to avoid damaging the wiring of your heated blanket. Firstly, never put your electric blanket into a commercial dryer or a dryer at a laundromat, as these can get too hot and damage the wiring. Instead, always use your own dryer at home, and follow these steps:
Firstly, preheat your dryer to a "low" temperature setting for 2 minutes. This is important, as a higher temperature may damage the blanket. Next, place the blanket into the dryer and tumble dry for no more than 10 minutes. It is recommended that you err on the side of caution, so if you are unsure, choose a lower temperature or a shorter duration.
Remove the blanket from the dryer while it is still damp, and gently reshape it to its original size. Finally, drape the blanket over a clothesline or a shower rod to finish drying.
It is important to always follow the manufacturer's instructions when tumble drying your electric blanket. Sunbeam heated bedding products are designed to be tumble dried, but other brands may have different instructions, so it is always best to check.
Fixing Your Karcher Electric Pressure Washer: DIY Guide
You may want to see also
