Trystan Casey
The Shoprider XtraLite Jiffy Power Wheelchair is a lightweight, highly portable, and ultra-maneuverable power chair. It is easy to transport as it can be disassembled into three pieces without tools. While the Jiffy electric wheelchair provides the benefits of power mobility, there may be times when you need to move it manually. This can be done by using the manual freewheel lever mounted on each motor, which allows you to disengage the drive motors and push the chair manually. However, it is important to treat your unit with care and follow good habits to ensure the longevity of your Jiffy electric wheelchair.
| Characteristics | Values |
|---|---|
| Name | Jiffy Xtralite by Shoprider |
| Weight | 76 lbs. without the battery pack |
| Heaviest Piece | 43 lbs. |
| Seat | Luxurious pillow top leatherette 18" wide seat |
| Seat Rest | Adjustable armrests, headrest, seat belt, and semi-recline feature |
| Ease of Transport | Disassembles into 3 pieces without tools |
| Safety | Equipped with manual freewheel levers mounted on each motor to disengage the drive motors and push manually |
| Water Resistance | Should not get wet to avoid malfunction and corrosion |
Explore related products
What You'll Learn
Locate the yellow freewheel levers on the motors
To locate the yellow freewheel levers on the motors of your Jiffy Electric Wheelchair, you must first turn off the power. This is important because failing to do so may result in an error message appearing on your controller. Once the power is off, you can identify the yellow freewheel levers, which are mounted on each motor. These levers are easily identifiable by their bright yellow tips.
When you have located the levers, you can push down on both levers simultaneously to disengage the drive motors and put your wheelchair in freewheel mode. This will allow you to manually push or move your wheelchair. It is important to note that when your wheelchair is in freewheel mode, the braking system is disengaged. Therefore, for safety, be sure to stand to the side of the wheelchair, rather than directly in front or behind it.
When you are ready to re-engage the drive motors, simply pull up on both manual freewheel levers. Again, you may need assistance with this step. Be sure to avoid using your feet or standing on the levers, as this could damage the levers, motors, or brakes.
Consult the “Your Power Chair” section of your unit’s owner’s manual for more information on using your electric wheelchair’s freewheel levers.
Electric Sockets on Skirting Boards: Legal or Not?
You may want to see also
Explore related products
Turn off the power
To manually move a Jiffy electric wheelchair, it is important to first turn off the power. This is because, when the power is on, the wheelchair is in drive mode, and manually pushing or pulling it may result in an error message on the controller.
The power button on your Jiffy electric wheelchair is usually located on the controller. Once you have located it, simply press or toggle the button to turn off the power. The wheelchair is now powered off.
It is important to note that, when the power is off and the wheelchair is in freewheel mode, the braking system is disengaged. This means that, if you are on an incline, the wheelchair may roll on its own. Therefore, it is advised to avoid disengaging the motors on an incline or uneven surface.
Additionally, when turning off the power, ensure that no one is standing directly in front of or behind the wheelchair. Individuals should stand to one side of the wheelchair when turning off the power or manually moving it.
After turning off the power, you can proceed to locate the freewheel levers to put the wheelchair in freewheel mode and allow for manual pushing or pulling.
Creating Electricity: DIY Power Generation for Off-Grid Living
You may want to see also
Explore related products
Push down on both levers to disengage the motors
To manually move a Jiffy electric wheelchair, you need to disengage the drive motors. This is done by pushing down on both freewheel levers, which are mounted on each motor and identifiable by their bright yellow tips. By pushing down on both levers, you activate the freewheel mode, which allows you to push the wheelchair manually.
It is important to remember to turn off the power to the wheelchair before pushing down on the levers. This will prevent any error messages or issues. Once the power is off, you can safely push down on the levers to disengage the motors.
When disengaging the freewheel levers, it is recommended to stand on one side of the wheelchair, not directly in front or behind it. This is a safety precaution to avoid any accidental activation of the motors. Additionally, be gentle with the levers as applying excessive force can harm the levers, motors, and brakes.
After you have pushed down on both levers and disengaged the motors, you can now manually push or move the wheelchair. This is useful for transporting the wheelchair or moving it in spaces where electronic control is not feasible. Remember to be cautious and gentle during this process to ensure the safety of both the user and the wheelchair.
Muscle Response to Electrical Impulses: Understanding the Science
You may want to see also
Explore related products
Manually push or pull the chair
To manually push or pull a Jiffy electric wheelchair, you must first locate the yellow freewheel levers. These are mounted on each motor of the wheelchair and have a bright yellow tip. Once located, ensure that the power to the wheelchair is turned off. Then, push down on both levers to put the chair in freewheel mode, which disengages the drive motors. Now, you can manually push or pull the chair.
When manually moving the chair, it is important to be gentle with the freewheel levers. Do not use excessive force as this could damage the levers, motors, and brakes. Additionally, do not use your feet to move the levers, and do not stand on top of them. When disengaging or re-engaging the levers, stand on one side of the chair, not directly in front or behind it.
If you need to move the wheelchair onto an elevator, there are a few things to keep in mind. First, check the elevator's weight capacity and interior dimensions to ensure that the wheelchair and user fall within the safe limits. Make sure there is adequate room to enter and turn around. Look for any obstructions and ensure the threshold is low enough for easy access. After summoning the elevator, press the buttons for your desired floor while waiting beside the doors. As the doors start to reopen, pause and verify that there is enough room and no obstructions before moving the wheelchair inside.
When inside the elevator, wheel towards the back wall to allow room for other passengers and to avoid blocking door sensors. Be careful not to lean against or hold the door open buttons for too long. If the elevator is crowded, you may need to ask for assistance to tilt the wheelchair backward to raise the front wheels onto the threshold. Once inside, reposition the wheelchair to face the doors in preparation for exiting.
Firefighters' Tactics for Electrical Fires: A Step-by-Step Guide
You may want to see also
Explore related products
Re-engage the motors by pulling up on the levers
To re-engage the motors of your Jiffy electric wheelchair, locate the freewheel levers, which are identifiable by their bright yellow tips. Make sure that the power to the wheelchair is turned off. Then, pull up on both levers to re-engage the drive motors. This will put the power wheelchair back in drive mode.
When re-engaging the levers, it is important to stand on one side of the power chair, rather than directly in front or behind it. This is because, when in freewheel mode, the braking system on the chair is disengaged. Additionally, be gentle with the levers, as applying excessive force could harm the power chair's freewheel levers, motors, and brakes.
You may need assistance with re-engaging the freewheel levers. If so, ask a caregiver or loved one to help you. It is important to note that you should not use the freewheel lever handles as tie-down points to secure the wheelchair during transport, as this can damage the levers and the chair's brakes or motors.
Finally, it is recommended that you consult the "Your Power Chair" section of your unit's owner's manual for more information on using the electric wheelchair's freewheel levers and pushing your wheelchair.
Electric Pallet Jack: Quick DIY Fixes and Maintenance
You may want to see also
