Otis Singleton
If you're looking to rebuild your snowblower's electric starter, you may want to consider replacing it with a new one. This is a repair guide to help you replace the electric starter on your snowblower. Before replacing the starter, ensure the engine spins normally by pulling the recoil starter rope. If the starter won't spin to start the engine when activated, replace it with a manufacturer-approved snowblower part. You can find replacement starters for snowblowers on Amazon, with some customers reporting ease of installation and good performance.
| Characteristics | Values |
|---|---|
| Starter type | Electric |
| Starter model number | 33329 |
| Starter variants | 33329F, 33329C, 33329D, 33329E, 33329H |
| Starter brand | OCPTY, OEG, CRANK N CHARGE, Tecumseh |
| Starter compatibility | Ariens, Craftsman, Husqvarna, MTD, Troybilt, Murray, Poulan, Yard-Man, Noma, Sears, Toro |
| Starter ease of installation | Easy, some customers report issues with durability |
| Starter price | Good value for money |
Explore related products
What You'll Learn
When to replace the electric starter
The electric starter of a snowblower should be replaced when it fails to function properly. This could be due to several reasons, including:
- A faulty or damaged starter motor: If the starter motor is not working, it will need to be replaced. This could be due to various issues, such as a broken mounting bracket, as mentioned in one review, or a fried starter.
- Worn or damaged teeth on the gear: In one case, a user found that all the teeth on the gear of their electric starter were ground off, requiring replacement.
- Incompatibility with the engine: Some users have mentioned issues with the starter not engaging the engine, which may be due to incompatibility or other underlying issues.
- Other underlying issues: In some cases, issues with the spark plug, fuel system, or ignition coil may cause the starter to malfunction, requiring further diagnosis and potential replacement.
It is important to note that replacing the electric starter is a manageable DIY task, and resources are available to guide users through the process. Additionally, it is crucial to use high-quality, genuine OEM starter parts designed to withstand harsh winter conditions and frequent use.
Mastering Electrical Physics: Strategies for Success
You may want to see also
Explore related products
Removing the spark plug wire
If your snowblower won't start, the spark plug could be damaged or faulty. Before attempting to remove the spark plug wire, make sure to disconnect the spark plug and battery cables for safety.
To remove the spark plug wire, you will need to slowly and carefully pull the wire straight up and off the plug. It is important to be gentle during this process to avoid damaging the wire or the plug.
Once the wire is disconnected, you can proceed to remove the spark plug from the cylinder using a deep socket and a ratchet. This will ensure that the spark plug is securely removed without causing any damage to the surrounding components.
After removing the spark plug, it is important to check the gap between the electrodes to ensure it is set correctly. This can be done using a gap gauge, which should fit snugly between the electrodes with only slight resistance when pulled out. If the gap is too wide or too narrow, adjustments can be made using a small hammer or the bender on the gap gauge.
Finally, when you are ready to reconnect the spark plug wire, simply follow the previous steps in reverse. Ensure that the spark plug is properly seated and tightened, but be careful not to over-tighten it as this may cause damage or breakage. Always refer to the owner's manual for specific instructions and safety precautions before attempting any repairs or maintenance on your snowblower.
Electrical Room Safety: Sprinkler Systems and Their Requirements
You may want to see also
Explore related products
Unfastening the switch box
To unfasten the switch box of your snowblower, you will need to first ensure that the engine spins normally by pulling the recoil starter rope. If the engine is locked up, the electric starter will not spin. Next, pull the spark plug wire straight up and off the plug. Now, to actually unfasten the switch box, you need to remove the two screws that secure it to the engine. Once the screws are removed, pull the switch box away from the engine and let it hang by the power cord going to the starter motor.
It is important to note that before attempting any repairs or maintenance on your snowblower, you should always consult the manufacturer's instructions or a qualified technician to ensure that you are performing the tasks correctly and safely.
Additionally, when working on any engine-powered equipment, it is crucial to take the necessary safety precautions, such as wearing protective gear and ensuring proper ventilation.
By following these steps, you will be able to safely unfasten the switch box of your snowblower and proceed with further maintenance or repairs as needed. Remember to consult the appropriate resources and follow safety guidelines throughout the process.
If you encounter any issues or have specific questions regarding your snowblower model, it is recommended to seek advice from a professional technician or refer to the manufacturer's customer support services.
Cold Snap: Electrical Fires and Extreme Weather
You may want to see also
Explore related products
Choosing a replacement starter
When choosing a replacement starter, there are a few key considerations to keep in mind. Firstly, it is important to ensure that the replacement starter is compatible with your specific snowblower model. Check the manufacturer's guidelines or consult a qualified technician to confirm compatibility. Additionally, pay attention to the voltage and current rating of the replacement starter to ensure it matches the requirements of your snowblower.
The type of starter is also an important factor. There are different types of starters available, such as magnetic motor starters and manual motor starters. Magnetic motor starters use electromagnetic forces to control the motor's electrical circuit, while manual motor starters may offer a more straightforward mechanical operation. Choose the type that aligns with your preferences and the design of your snowblower.
When selecting a replacement starter, consider the ease of installation. Some starters may offer a more straightforward installation process, requiring minimal adjustments and transfers of components. Others might require additional steps, such as transferring heat shields or brackets. Opt for a replacement starter that comes with clear installation instructions and, if necessary, seek guidance from a qualified technician.
The weight of the starter is another factor to consider. Starters can be heavy, often weighing more than 20 pounds. If the starter is particularly heavy, you may need an assistant to help with the lifting and positioning during the installation process. Ensure that you have the necessary tools, such as wrenches or sockets, to handle the weight safely and securely.
Lastly, pay attention to the quality and reliability of the replacement starter. Check reviews and testimonials from other users to gauge the performance and longevity of the starter. Opt for reputable brands or manufacturer-approved parts to ensure a durable and dependable replacement. Remember that electrical systems can be hazardous, so always exercise caution and seek professional assistance if you have any doubts.
Electric Rates: Summer Savings or Summer Spikes?
You may want to see also
Explore related products
Installation tips
Before installing a new electric starter, make sure the engine spins normally by pulling the recoil starter rope. If the engine is locked up, the electric starter won't spin the engine.
The Tecumseh Starter 33329 33329C 33329D 33329E 37000 is an auto part for snowblowers and snow throwers. The unit comes with new mounting hardware and a grounded electrical cord. It is easy to install, although you will need to be patient with the motor mounting bracket holes, which are a tighter tolerance than the original motor. You will need a Torx screwdriver in addition to a Phillip's screwdriver and sockets.
The electric starter spins the crankshaft to start the engine. Make sure to wear work gloves to protect your hands.
If you are replacing the starter, remove the spark plug wire by pulling it straight up and off the plug. Then, remove the two screws that secure the switch box to the engine. Pull the switch box away from the engine and let it hang by the power cord going to the starter motor.
Electric Mitts and Boots: Warming You Up Efficiently
You may want to see also
Frequently asked questions
The first step is to check if the engine spins normally by pulling the recoil starter rope. If the engine is locked up, the electric starter will not work. If the starter does not spin to start the engine, it may be time to replace it.
The OCPTY Tecumseh Starter Replacement is a popular choice for snowblower and snow thrower models 33329, 33329C, 33329D, 33329E, and 37000. Other options include the DISCOUNT STARTER & ALTERNATOR Starter, the CRANK N CHARGE 5898N Starter, and the Ruma Electric Starter Motor 751P12207A.
It is recommended to wear work gloves when handling the replacement starter. Additionally, some customers have noted that the motor mounting bracket holes may be a tighter tolerance than the original motor, so patience is required during installation.
