
Resetting the clock on a Bosch electric bike is a straightforward process. To begin, power on your bike by pressing and holding the power button on the Intuvia or Purion display unit until it lights up. Once your display is active, access the settings menu. On the Intuvia display, press and hold the 'i' button for a few seconds. For Purion displays, press the 'Power' and '+' buttons simultaneously for a few seconds. You should now be in the settings menu. From here, you can adjust the clock using the lower row of buttons (the on/off and light buttons).
Characteristics | Values |
---|---|
Step 1 | Power on your bike |
Press and hold the power button until it lights up | |
Step 2 | Access the settings menu |
On the Intuvia display, press and hold the 'i' button | |
For Purion displays, press the 'Power' and '+' buttons simultaneously | |
Step 3 | Navigate to the clock settings |
Using the '+' and '-' buttons, navigate through the menu until you reach the clock setting | |
Step 4 | Set the time |
Use the On and Off buttons | |
Step 5 | Save your settings |
Press the Reset button for about two seconds |
What You'll Learn
Powering on your Bosch electric bike
Once your display is active, you can access the settings menu. On the Intuvia display, press and hold the 'i' button for a few seconds. For Purion displays, press the 'Power' and '+' buttons simultaneously for a few seconds.
From here, you can adjust the clock settings. Using the +' and '-' buttons, navigate through the menu until you reach the clock setting. You can then set the correct time using the On and Off buttons.
Finally, press the Reset button for about two seconds to confirm your input. Please note that setting the clock manually only works when the e-bike is stationary.
Registering Your Electric Bike: A Guide for Singapore Riders
You may want to see also
Accessing the settings menu
To access the settings menu on your Bosch electric bike, you must first power on the bike. You can do this by pressing and holding the power button on the Intuvia or Purion display unit until it lights up. Once the display is active, you can access the settings menu.
On the Intuvia display, press and hold the 'i' button for a few seconds. For Purion displays, press the 'Power' and '+' buttons simultaneously for a few seconds. You should now be in the settings menu.
The settings menu will open with an indication of the current time. You can then use the lower row of buttons (the on/off and light buttons) to adjust the clock.
Traveling with E-bikes: Flying High with Your Electric Ride
You may want to see also
Navigating to the clock settings
To navigate to the clock settings on your Bosch electric bike, first power on your bike by pressing and holding the power button on the Intuvia or Purion display unit until it lights up. Once your display is active, access the settings menu. On the Intuvia display, press and hold the 'i' button for a few seconds. For Purion displays, press the 'Power' and '+' buttons simultaneously for a few seconds. You should now be in the settings menu.
Using the '+' and '-' buttons, navigate through the menu until you reach the clock setting. Once you are in Settings, press the 'i' button for a longer duration to enter the submenu. Use the '+' or '-' buttons to select the 'Clock' setting. Press the 'i' button again to confirm your selection.
Locking Up Your Electra Bike: Easy and Effective Ways
You may want to see also
Adjusting the clock
Once you're in the settings menu, you can adjust the clock with the lower row of buttons (the on/off and the light buttons). Use the '+' and '-' buttons to select the 'Clock' setting. Press the 'i' button again to confirm your selection, and then adjust the hours and minutes using the '+' and '-' buttons as needed.
To save your settings, press the reset button again for about two seconds. The display then automatically exits the settings menu.
Removing G-Force Electric Bike Battery: A Step-by-Step Guide
You may want to see also
Saving your settings
Once you have adjusted the clock settings on your Bosch electric bike, you will need to save your settings. To do this, press the reset button again for about two seconds. You can also turn on the motor and then press the reset and info buttons at the same time for about two seconds. The display will then automatically exit the settings menu.
If you have a Kiox 300, Kiox or Intuvia display, you can save your settings by using the lower row of buttons (the on/off and the light buttons).
If you have a Purion display, press the 'Power' and '+' buttons simultaneously for a few seconds.
Your settings will now be saved, and you can get back to enjoying your ride with accurate timekeeping.
Transform Your Bike: Electric Power, Easy Steps
You may want to see also
Frequently asked questions
First, turn on your Bosch electric bike. Then, access the settings menu by holding the power button on the Intuvia or Purion display unit. Once in the settings menu, navigate to the clock settings and adjust the time using the '+' and '-' buttons. Finally, press the reset button for two seconds to save your settings.
On the Intuvia display, hold the 'i' button for a few seconds. On the Purion display, hold the power and '+' buttons simultaneously.
Press the reset button for about two seconds.
No, setting the clock manually only works when the bike is stationary.