Servicing A Tmc Electric Toilet: A Step-By-Step Guide

how to service a tmc electric toilet

Servicing a toilet is an unpleasant but necessary task, especially when it comes to boat toilets. TMC Technology Corp. offers a range of electric toilets and service kits, such as the Quiet Electric Toilet (TMC-29824) and the Electric Toilet (TMC-29924). These toilets come with a one-year warranty, covering defects in materials and workmanship. However, it's important to note that the warranty has several exceptions, including misuse, water damage, and improper maintenance. To service a TMC electric toilet, it is recommended to disconnect the power to the pump for safety purposes. Additionally, using the correct toilet chemicals and accessories can help maintain hygiene and prevent odours.

Characteristics Values
Price $499.99
Motor 12V / 24V
AMP DRAW 18A (12V) / 9A (24V)
FUSE SIZE 30A (12V) / 15A (24V)
FITTING 1” (25mm) ID inlet hose; 1” (25mm) ID discharge hose
WEIGHT 14.46kgs/pc (31.88lbs)
Warranty 1 year
Warranty Exceptions Repaired, altered, misused, modified, mistreated, water-damaged, serial number removed, defaced, or changed
Maintenance Use toilet paper designed for marine toilets, use a dedicated marine toilet cleaner, put some fresh water in the bowl and flush it through the system before leaving the boat; Use the correct toilet chemicals and accessories; Disconnect power to the pump before servicing

shunzap

Disconnect power to the pump before servicing

Disconnecting power to the pump before servicing is an important safety precaution when it comes to maintaining your TMC electric toilet. This step is crucial to ensure your safety and prevent any accidental activation of the pump during the servicing process. Here are some detailed instructions to guide you through this step effectively:

Firstly, locate the power source for the pump. This could be a dedicated power switch or a circuit breaker that supplies power to the toilet's pump. Ensure that you have access to this power source and can control it. Next, turn off the power supply to the pump. If there is a dedicated switch, simply flip it to the off position. If you're using a circuit breaker, you might need to flip the corresponding breaker to the off position or remove the fuse to ensure power is disconnected.

Once the power is turned off, it is essential to verify that the pump is indeed inactive. You can do this by attempting to operate the toilet. If the pump does not activate, you can be sure that the power has been successfully disconnected. Now, proceed to lock out or tag out the power source to ensure that no one accidentally reactivates the power while you are servicing the toilet. This can be done using a padlock or a tag designed for this purpose, clearly indicating that the system is under maintenance.

By following these steps, you can safely disconnect the power to the pump before servicing your TMC electric toilet, ensuring a safer maintenance experience and reducing the risk of any accidental activation of the pump during your work. Remember to restore power carefully once your servicing work is complete, and always refer to the TMC toilet manual for any additional instructions or safety precautions specific to your model.

shunzap

Use toilet paper designed for marine toilets

Servicing a boat toilet is an unpleasant but necessary task. Using the correct toilet paper is an important step in maintaining your TMC electric toilet. Marine toilets require specific types of toilet paper to function properly and avoid blockages. Standard toilet paper is designed to break down quickly in septic tanks, but it can cause clogs in boat toilets. Marine toilet paper is designed to break down more slowly, so it will not dissolve as quickly and cause blockages. It is also stronger and more durable, so it can withstand the unique conditions of a boat toilet.

Marine toilet paper is designed to be used in small quantities and to be compact, so it is important to use it sparingly. It is also more expensive than standard toilet paper, so it should be used efficiently. Marine toilet paper is available in most marine supply stores and some larger hardware stores. It is also available online.

It is important to note that not all marine toilet papers are created equal. Some are better suited for portable toilets, while others are designed for pump-out heads. Be sure to read the labels carefully to ensure you are choosing the right type for your TMC electric toilet.

In addition to using marine toilet paper, there are other steps you can take to maintain your TMC electric toilet. Using the correct toilet chemicals and accessories will help keep your toilet hygienic and odour-free. You should also use a dedicated marine toilet cleaner, as bleach will break down the seals inside the toilet and cause them to fail. Finally, remember to put some fresh water in the bowl and flush it through the system before you leave the boat to prevent bacteria and other microorganisms in seawater from causing a smell.

shunzap

Use a dedicated marine toilet cleaner

Servicing a toilet is a task most people would rather avoid, but not maintaining your boat toilet can lead to big problems. Using the correct toilet chemicals and accessories will help keep your toilet hygienic and odour-free.

Marine toilets need not smell, but they often do. The discharge hose is the most common culprit. To check, rub the hose with a damp, clean cloth, then sniff the cloth. If it has an odour, the hose is permeable, and you will need to replace it. Another common source of odour is grass and other marine life trapped inside the flush-water passage under the rim of the bowl. Prevent this by installing a strainer in the intake line.

To keep the pump operating smoothly, follow your monthly vinegar flush with a dose of oil. The best choice is a lubricant intended for marine toilets, but mineral oil can also be used. An anti-siphon valve in the discharge line can also release odours into the boat. A properly installed valve vents outside the cabin area.

Toilet bowl cleaners and treatments are available to help manage waste and odours in marine sanitation systems. For example, C.P. Marine Toilet Bowl and Drain Cleaner and K.O. Kills Odor are bioactive treatments. Follow the manufacturer's instructions regarding dosage and frequency of application. Maintain a regular schedule for adding bio-active treatments to the holding tank. Use bio-active treatments alongside chemical disinfectants, as they can kill beneficial bacteria and reduce their effectiveness. Always refer to the specific product instructions and consult experts or professionals in the marine industry for guidance on the most suitable treatment for your boat's holding tank.

shunzap

Use the correct toilet chemicals and accessories

Using the correct toilet chemicals and accessories is essential for maintaining a hygienic and odour-free TMC electric toilet. Here are some detailed instructions and tips to help you with this process:

Firstly, always remember to disconnect the power to the pump before servicing your TMC electric toilet. This is an important safety precaution. Using the correct marine toilet chemicals is crucial. Avoid using bleach, as it can be harmful to the marine environment and will also break down the seals inside the toilet, causing them to fail prematurely. Instead, opt for dedicated marine toilet cleaners, which are designed to effectively clean and maintain your toilet without causing damage.

When it comes to toilet paper, always use the type designed specifically for marine toilets. This toilet paper is made to break down easily, reducing the likelihood of blockages. It is a simple yet important step in maintaining your TMC electric toilet. Additionally, remember to put some fresh water in the bowl and flush it through the system before you leave the boat. This helps prevent bacteria and other microorganisms in seawater from causing unpleasant odours.

By following these instructions and using the correct chemicals and accessories, you can effectively maintain your TMC electric toilet, ensuring it remains hygienic and odour-free. These steps will help prolong the life of your toilet and improve its overall performance.

shunzap

Put fresh water in the bowl and flush before leaving the boat

Servicing a toilet is a job most of us would rather avoid, but not maintaining your boat's toilet can lead to big problems. One simple step to improve the performance of your TMC electric toilet is to put fresh water in the bowl and flush before leaving the boat.

Putting fresh water in the bowl and flushing it through the system before you leave the boat will stop bacteria and other microorganisms in seawater from causing a smell. It will also prevent the calcification of pipes and valves, which can lead to frequent offensive odors. Even "clear to the bottom" seawater does not prevent this issue.

Freshwater flushing is recommended by most manufacturers, especially when leaving the boat for any length of time. It is also beneficial for preventing the nasty brown ring that can form in the bottom of the bowl.

To flush with freshwater, you can use the boat's freshwater pressure pump to pump water into the bowl. Alternatively, if you have a manual pump, you can simply pump freshwater by hand instead of saltwater.

Using the correct toilet chemicals and accessories will also help keep your toilet hygienic and odor-free.

Frequently asked questions

Here are some general tips for servicing your TMC electric toilet:

- Disconnect the power to the pump before servicing.

- Use toilet paper designed for marine toilets.

- Use a dedicated marine toilet cleaner instead of bleach.

- Put some freshwater in the bowl and flush it through the system if you won't be using the toilet for a while.

- Use the correct toilet chemicals and accessories to keep the toilet hygienic and odour-free.

TMC Technology Corp. warrants that its marine equipment will be free from defects in materials and workmanship for one year from the date of purchase. If a defect arises during the one-year warranty period, TMC will repair or replace the product or parts.

The warranty does not cover normal wear and tear of seals and/or stators, or results of dry-running. It also does not cover damage caused by misuse, abuse, accident, water freezing inside the product, or failure to follow the owner's manual.

Written by
Reviewed by

Explore related products

Share this post
Print
Did this article help you?

Leave a comment