Boost Your E-Bike Speed: Tips And Tricks

There are many ways to increase the speed of an electric bike. Some are simple, such as adjusting the level of pedal assist, while others are more complex, like upgrading the battery to a higher voltage. You can also reduce drag by assuming a more bent-over position, closer to a road bike, or by using smoother and thinner tires.

Upgrade the battery to a higher voltage

Upgrading the battery to a higher voltage is a great way to increase the maximum speed of your electric bike. However, you must be careful when doing so, as there is a risk of the motor burning out. Before upgrading, consult the manufacturer or an expert technician to ensure that your existing motor can handle the increased voltage.

When upgrading the battery, it is important to ensure that it is fully charged before taking your bike out for a ride. Riding with a low battery will reduce the power output and decrease the speed of your bike. It will also shorten your ride time, as the power may run out sooner than expected.

To avoid any issues, it is recommended to consult a professional technician when upgrading your battery. They can guide you through the process and ensure that your bike can handle the increased voltage. This will help you avoid any potential damage to your bike and ensure a safe and enjoyable riding experience.

Upgrading to a higher voltage battery can significantly impact the performance of your electric bike. By providing more power, you can achieve higher speeds and accelerate faster. This is especially beneficial if you plan to ride on varied terrain or carry additional weight, as the extra voltage will give your bike the boost it needs to maintain speed and handle challenging conditions.

Use smoother and thinner tires

Using smoother and thinner tires is a great way to increase the speed of your electric bike. Narrower tires reduce drag, thrusting your bike forward. Tires with deep treads increase grip on the surface, allowing for higher speeds and a smoother ride.

Controlling or reducing air resistance is another way to make your electric bike faster. Adding a windshield can increase your bike's top speed by up to 3 m/h, making your rides faster and smoother.

You can also reduce drag by assuming a more bent-over position, similar to a road bike. The more upright your torso is, the more wind you catch, and the slower your bike will go.

If you're looking for a sneaky way to increase your bike's speed, you can disable the speed sensor or trick it into measuring a speed lower than your actual speed. However, doing so will likely void your warranty and increase your liability in the event of an accident. It may also make your e-bike illegal, leaving you vulnerable to prosecution.

Adjust the level of pedal assist

Adjusting the level of pedal assist is one of the easiest ways to make your electric bike go faster. While you can always just pedal harder, you can also adjust the electrical configurations of your bike to increase the level of pedal assist. This will make your bike go faster without you having to put in more effort.

You can also increase the speed of your electric bike by upgrading the battery to a higher voltage. However, you must be careful when doing this as there is a risk of the motor burning out. It is recommended that you consult the manufacturer or an expert technician to know if the existing motor can handle the increased battery voltage.

Another way to make your electric bike go faster is to reduce the amount of drag. You can do this by using smoother and thinner tires, as narrower tires reduce the amount of drag and thrust the bike forward. You can also reduce drag by assuming a more bent-over position, similar to a road bike. The more upright your torso is, the more wind you will catch, and the slower the bike will go.

You can also try disabling the speed limiter on your electric bike. This can be done by disconnecting the cable held within the controller. However, this method is not recommended as it will likely void your warranty, increase your liability in the event of an accident, and make your electric bike illegal.

Reduce drag by assuming a more bent-over position

To speed up an electric bike, you can reduce drag by assuming a more bent-over position. This is because the more upright your torso is, the more wind you catch, and the slower the bike will go at a given power output. The effect of aerodynamics is less notable when climbing steep gradients, but weight is much more consequential.

To reduce drag, you can also use smoother and thinner tires, as narrower tires reduce the amount of drag and thrust the bike forward. Tires with deep treads will increase the grip on the surface, ensuring higher speeds and smoother rides. You can also add a windshield, which can add up to 3 m/h to the bike’s top speed.

Another way to increase the speed of your electric bike is to upgrade the battery to a higher voltage. However, you must be careful while updating it as there’s always a risk of the motor burning out. You can consult the manufacturer or an expert technician to know if the existing motor can put up with the increased battery voltage.

Disable the speed limiter

There are several ways to speed up an electric bike, including disabling the speed limiter.

One way to speed up an electric bike is to disable the speed limiter. This can be done by disconnecting the cable held within the controller. This method is suitable for cheaper or older electric bikes. However, it is important to note that disabling the speed limiter may void the warranty, increase liability in the event of an accident, and make the bike illegal.

Another way to trick the bike into thinking it is going slower than it actually is, is to move the speed sensor magnet from the wheel to the crank. This will allow the bike to reach higher speeds without triggering the speed limiter. Again, this method may have legal implications and impact the warranty.

It is important to consult a technician or the manufacturer before making any modifications to an electric bike, as there are safety risks involved.

Other ways to speed up an electric bike

Upgrading the battery to a higher voltage can boost the max speed of an electric bike. However, this must be done carefully to avoid the risk of the motor burning out. Consulting a technician is recommended to ensure the existing motor can handle the increased voltage.

Reducing drag is another way to increase the speed of an electric bike. This can be achieved by using smoother and thinner tires, as well as assuming a more bent-over position while riding. A windshield can also be added to reduce air resistance and increase speed.

Frequently asked questions