Aventon Electric Bike: Turning It On

Aventon electric bikes are easy to turn on and use. To power up your Aventon bike, tap the power button on the battery. You'll see 1-4 green LEDs that show the current charge level, then a single green LED that stays on permanently, showing the battery is turned on. Next, press and hold the “M” button on the handlebar-mounted controls to turn on the display. Now, your bike is ready to ride.

How to power up your Aventon bike

To power up your Aventon bike, start by tapping the power button on the battery. You should then see 1-4 green LEDs that indicate the current charge level, followed by a single green LED that stays on permanently, showing that the battery is turned on. Next, press and hold the “M” button on the handlebar-mounted controls to turn on the display. Your Aventon bike is now ready to ride.

If it’s your first time riding, it is recommended that you simply pedal for a bit without any pedal assist or throttle to help you find your balance. Once you’re comfortable, you can add some pedal assist by tapping the up or down arrows on the controls to change the level of pedal assist. The Level e-bike offers pedal assist, where an electric motor supplements the rider’s own effort. To use the pedal assist, start pedalling, then tap the “U” or “D” arrows to increase or decrease the amount of pedal assist.

The Aventon Pace 500 features a throttle that you can use to propel the bike without pedalling. To use it, start pedalling for a moment, then press the throttle with your thumb. The Level bike is also equipped with a throttle, which is mounted near the rider’s left thumb.

How to turn on the display

To turn on the display of your Aventon electric bike, press and hold the “M” button on the handlebar controls. You will then be able to see a variety of metrics, including an odometer, battery level, pedal assist levels, and trip distance. To cycle through the information, use the “i” button on the control panel, which acts as a menu button.

How to use the throttle

To turn on an Aventon electric bike, first power up the bike by tapping the power button on the battery. You will briefly see 1-4 green LEDs that show the current charge level, then a single green LED that stays on permanently, showing the battery is turned on. Next, press and hold the “M” button on the handlebar-mounted controls. The display will turn on, and your e-bike will be ready to ride.

Aventon electric bikes have a throttle, which is mounted near the rider’s left thumb, to propel the bike without pedalling. To use the throttle, start pedalling for a moment, then press the throttle with your thumb. You can also use pedal assist, which will engage at speeds up to 28 mph. To use pedal assist, simply start pedalling, then tap the “U” or “D” arrows to increase or decrease the amount of pedal assist. Tap the up or down arrows on the controls to change the level of pedal assist.

How to use pedal assist

To turn on an Aventon electric bike, you need to power up the battery by tapping the power button. You will then see 1-4 green LEDs that show the current charge level, followed by a single green LED that stays on permanently, showing the battery is turned on. Next, press and hold the “M” button on the handlebar-mounted controls to turn on the display. Now, your bike is ready to ride.

If it’s your first time riding, it is recommended that you simply pedal for a bit without any pedal assist or throttle while you find your balance. Once you’re comfortable, you can add some pedal assist. To do this, start pedalling and then tap the “U” or “D” arrows to increase or decrease the amount of pedal assist. You can also use the throttle, which is mounted near your left thumb, to propel the bike without pedalling. The throttle is useful if you want to give your legs a rest or need an extra boost to get up a hill.

The Aventon app also offers a colour display that shows a variety of metrics, including an odometer, battery level, pedal assist levels, and trip distance. To use this display, turn on the display using the power button on the control pad. You can then use the “i” button on the control panel to cycle through the information.

Aventon e-bikes also have a “Walk Mode” feature that helps you walk your e-bike up inclines with a gentle motor assist. To activate it, just push and hold the down button on your left handlebar.

How to use walk mode

To turn on an Aventon electric bike, you need to power up the bike by tapping the power button on the battery. You will then see 1-4 green LEDs that show the current charge level, followed by a single green LED that stays on permanently, showing the battery is turned on. Next, press and hold the “M” button on the handlebar-mounted controls. The display will turn on, and your e-bike will be ready to ride.

Aventon electric bikes have a "Walk Mode" feature that helps you walk your e-bike up inclines with gentle motor assistance. To activate Walk Mode, push and hold the down button on your left handlebar.

To enter the settings mode, press and hold the Up and Down arrows for two seconds. Tap the “M” button to move through the setting modes until you reach an option labelled: 05P. Press the Up or Down arrows to set your desired speed limit and tap the M button to lock in your new setting.

If you are using pedal assist, an electric motor supplements the rider’s own effort. To use the pedal assist, simply start pedalling, then tap the “U” or “D” arrows to increase or decrease the amount of pedal assist. Pedal-assist will engage at speeds up to 28 MPH.

If it’s your first time riding, we suggest simply pedalling for a bit without any pedal assist or throttle while you find your balance. Once you’re comfortable, add some pedal assist.

Frequently asked questions