Activating Your Totguard Electric Bike: A Step-By-Step Guide

TotGuard electric bikes are an electrifying blend of convenience and sustainability. They are the perfect everyday electric scooter for the daily commute. Before you embark on your journey, you'll need to know how to power on your TotGuard electric bike. This will either be done with a turn of a key or a press of a button.

Charging the battery

To charge the battery of your TotGuard electric bike, you must first connect the battery charger to a power outlet and then to your bike's battery port. A complete charge typically takes several hours. You will know that the battery is fully charged when the charger turns from red to green. Once charged, securely fasten the battery into its designated compartment on the bike.

Before turning on your bike, it is important to perform a quick safety check. Make sure the brakes are functioning, the tires are adequately inflated, and the frame is free from any damage. Check that the battery is securely fastened and the power button is accessible. The power button is usually located on the control display on the handlebars or on the battery pack.

If your bike is equipped with a key ignition, insert the key and turn it to the 'on' position to activate the bike's electrical system. You may need to twist the key clockwise to turn on the battery and then press the middle button for 3 seconds to turn on the display. Check the display to ensure that the speed, battery level, and other indicators are visible and functioning.

Now, you are ready to select your preferred level of pedal assistance on the control panel and embark on your ride. Always consult your specific model's manual for precise instructions, as the process might differ slightly across various versions of TotGuard e-bikes.

Inserting the key

To turn on your TotGuard electric bike, you need to insert the key into the key ignition and turn it to the 'on' position to activate the bike's electrical system. Check the display to ensure that the speed, battery level, and other indicators are visible and functioning.

If your bike doesn't have a key ignition, you'll need to press the power button on the control display located on the handlebars after activating the battery power.

Before turning on your bike, make sure the battery is fully charged. Connect the battery charger to a power outlet and then to your bike's battery port. A complete charge typically takes several hours. Once charged, securely fasten the battery into its designated compartment on the bike.

Always consult your specific model's manual for precise instructions, as the process might differ slightly across various versions of TotGuard e-bikes.

Pressing the power button

To turn on your TotGuard electric bike, you must first ensure that your bike's battery is fully charged. Connect the battery charger to a power outlet and then to your bike's battery port. A complete charge typically takes several hours. Once charged, securely fasten the battery into its designated compartment on the bike. Before turning on your bike, perform a quick safety check. Make sure the brakes are functioning, the tyres are adequately inflated, and the frame is free from any damage.

Now, locate the power button – usually situated on the battery pack or bike’s display interface. Some TotGuard models require you to press the power button on the control display located on the handlebars after activating the battery power. If your bike is equipped with a key ignition, insert the key and turn it to the 'on' position to activate the bike's electrical system. Press and hold the power button until the display lights up, signalling that the bike is on. Check the display to ensure that the speed, battery level, and other indicators are visible and functioning. Your TotGuard electric bike is now ready to go!

Checking the display

Now, locate the power button – usually situated on the battery pack or bike’s display interface. Press and hold this button until the display lights up, signalling that the bike is on. If your bike is equipped with a key ignition, insert the key and turn it to the 'on' position to activate the bike's electrical system.

Check the display to ensure that the speed, battery level, and other indicators are visible and functioning. Your TotGuard electric bike is now ready to go! Select your preferred level of pedal assistance on the control panel if available, and embark on your ride. Always consult your specific model's manual for precise instructions, as the process might differ slightly across various versions of TotGuard e-bikes.

Safety checks

Before turning on your TotGuard electric bike, it is important to perform a quick safety check. Make sure the brakes are functioning, the tyres are adequately inflated, and the frame is free from any damage. Check that the battery is fully charged and securely fastened into its designated compartment. You should also ensure that the speed, battery level, and other indicators are visible and functioning on the display. If your bike is equipped with a key ignition, insert and turn the key to the 'on' position to activate the electrical system.

Some TotGuard models require you to press the power button on the control display located on the handlebars after activating the battery power. The power button is usually situated on the battery pack or bike's display interface. Press and hold this button until the display lights up, signalling that the bike is on.

If your model has a different process for turning on, always consult your specific model's manual for precise instructions. Safety should always come first, so it is important to familiarise yourself with the correct procedure for your particular TotGuard electric bike.

By following these simple steps, you can ensure that your TotGuard electric bike is ready for a safe and enjoyable journey.

Frequently asked questions