Wiktor Wise
Sunbeam electric blankets are convenient for cold nights, but they can be tricky to clean. Before washing, it's important to disconnect the power cord from the wall and control cord from the blanket, ensuring no wires are exposed. While some sources claim that Sunbeam electric blankets can be machine washed, others warn that they are delicate and prone to damage, even when washed according to instructions. Hand washing in a bathtub is a gentler alternative, but it's important to avoid submerging the control unit. To dry, gently reshape the blanket and drape it over a clothesline or shower rod. It's crucial to ensure the blanket is completely dry before reconnecting the power and using it again.
| Characteristics | Values |
|---|---|
| Before Washing | Disconnect the power cord from the wall, then detach the control cord from the blanket. |
| Check that the cords are not connected and that wires have not worn through the fabric. | |
| Washing | Presoak the blanket in mild soap and cold water for 15 minutes. |
| Wash in cold water on a "delicate" or "gentle" cycle for two minutes. | |
| Rinse in cold water and spin dry in the washing machine. | |
| Tumble dry on a low setting for 10 minutes. | |
| Remove the blanket while it is still damp and gently shape it to its original size. | |
| Hang the blanket over a clothesline or shower rod. | |
| Precautions | Do not submerge the control in water. |
| Do not dry clean, bleach, iron, or use mothballs or sprays. | |
| Do not reconnect the blanket until it is completely dry. |
Explore related products
What You'll Learn
Precautions: disconnect power cord, check for worn wires, don't submerge controls
Before you start washing your Sunbeam electric blanket, it is important to take certain precautions to ensure your safety and the longevity of the product. Firstly, always remember to disconnect the power cord from the wall outlet first, followed by detaching the control cord from the blanket. This is crucial as it severs the electrical connection, preventing any accidental activation that could lead to electrical hazards.
After disconnecting the cords, carefully inspect them for any signs of wear and tear. Pay close attention to the wires, ensuring they have not worn through the fabric. Worn or exposed wires can pose a serious safety hazard, as they may come into contact with water during the washing process, leading to electrical malfunctions or even short circuits.
When washing your Sunbeam electric blanket, never submerge the control in water. The controls contain sensitive electrical components that are not designed to withstand immersion. Always follow the manufacturer's instructions for washing and drying to avoid potential damage to the controls and wiring.
Additionally, it is important to note that dry cleaning is not recommended for electric blankets. Dry cleaning solvents can damage the wires, and the high temperatures of commercial dryers can compromise the wiring of your heated blanket. Instead, opt for gentle machine washing and drying at low temperatures, following the specific instructions provided by the manufacturer.
Goodman Electric Furnaces: Are They Under Warranty?
You may want to see also
Explore related products
Soak: in mild soap and cold water for 15 minutes
Before you start washing your Sunbeam electric blanket, it is important to take a few precautions. Firstly, disconnect the power cord from the wall and then detach the control cord from the blanket. Make sure that the cords are not connected, and carefully inspect the blanket to ensure that the wires have not worn through the fabric. It is crucial to follow these steps to avoid any potential fire hazards.
Now, let's talk about the soaking process:
Soaking Your Sunbeam Electric Blanket
- Fill a tub or a large container with cold water. Make sure the water is cold, as hot water may damage the electric components of the blanket.
- Add mild soap or detergent to the water. Avoid using bleach or other harsh cleaning chemicals, as they may damage the blanket.
- Gently place your Sunbeam electric blanket into the water and make sure it is fully submerged. Take care not to submerge the control in water, as this can cause damage.
- Let the blanket soak for 15 minutes. During this time, the mild soap and cold water will help to loosen and remove any dirt, stains, or odours from the blanket.
- After 15 minutes, gently swirl the blanket in the water to evenly distribute the soap and ensure that it has penetrated all areas of the blanket.
- Once the soaking is complete, carefully remove the blanket from the water. Do not wring or twist the blanket, as this can damage the wiring.
Remember to always refer to the specific care instructions provided by the manufacturer for your particular Sunbeam electric blanket model. These instructions may vary slightly depending on the design and features of your blanket.
Repairing Electric Dog Fences: A Quick Guide
You may want to see also
Explore related products
Wash: gentle cycle, 2 minutes, no bleach
To wash your Sunbeam electric blanket, start by disconnecting the power cord from the wall and then detaching the control cord from the blanket. Check that the cords are not connected and that the wires have not worn through the fabric.
Next, you will want to machine wash your blanket. Start by presoaking the blanket in mild soap and cold water for 15 minutes. Then, wash the blanket in mild soap and cold water on the delicate or gentle cycle in the washer for two minutes. Do not use bleach.
The gentle cycle on a washing machine uses slow agitation and a lower spin speed, making it perfect for delicate fabrics. This cycle uses warm water, a slower agitation, and a cool rinse to reduce wrinkles and prevent shrinking.
After washing, rinse the blanket in fresh, cold water. Then, spin-dry it in the washing machine. Remove the blanket while it is still damp and gently shape it to its original size.
Conquering the Electric Dragon: Strategies for Victory
You may want to see also
Explore related products
Dry: spin dry, tumble dry low for 10 minutes, air dry
When it comes to drying your Sunbeam electric blanket, there are a few important steps to follow and some things to avoid in order to properly care for your heated bedding. Firstly, do not use a commercial dryer or a dryer at a laundromat as these can get too hot and damage the wiring of your blanket. Instead, follow these steps:
Spin Dry
After rinsing your electric blanket, spin dry it in your washing machine.
Tumble Dry Low for 10 Minutes
Preheat your dryer at home to a "low" temperature setting for 2 minutes. Then, place your blanket in the dryer and tumble dry for 10 minutes at this low temperature.
Air Dry
Remove the blanket from the dryer while it is still damp. Gently shape it back to its original size. Drape the blanket over a clothesline or shower rod to finish air-drying. Make sure your electric blanket is completely dry before reconnecting the power and using it again.
It is important to note that you should never dry clean your Sunbeam electric blanket as the solvents may damage the wires. Additionally, do not use bleach or cleaning fluids, and do not iron your blanket.
How Electric Lawn Mowers Make Mowing Easy
You may want to see also
Explore related products
Tips: don't dry clean, iron, or use bleach
When it comes to caring for your Sunbeam electric blanket, there are several important don'ts to keep in mind to ensure you don't damage the blanket or its electrical components:
Do Not Dry Clean
The solvents used in dry cleaning can be harsh and may damage the inner wiring of your electric blanket. These chemicals can also negatively affect the heating system, so it's best to avoid dry cleaning despite its convenience.
Do Not Iron
Ironing an electric blanket can be extremely dangerous due to the heat and the potential for direct contact with the electrical components. This could result in a fire hazard or damage to the wiring.
Do Not Use Bleach
Avoid using any type of bleach, including chlorine bleach, when washing your electric blanket. Bleach is a harsh chemical that can damage the fabric and wiring of your electric blanket. Instead, opt for a mild detergent to clean your blanket safely and effectively.
In addition to these don'ts, it's important to remember to always disconnect the power cord and control cord from your electric blanket before washing and to ensure it is completely dry before reconnecting and using it again.
Electric Scooter Seat Assembly: A Step-by-Step Guide
You may want to see also
Frequently asked questions
Yes, Sunbeam electric blankets are machine washable. However, some users have reported that their blankets were damaged after washing.
Before washing, disconnect the power cord from the wall and the control cord from the blanket. Check that the cords are not connected and the wires have not worn through the fabric. Presoak the blanket in mild soap and cold water for 15 minutes. Wash in cold water on a delicate or gentle cycle for two minutes. Do not use bleach. Rinse in cold water and spin dry in the washing machine. Tumble dry on a low setting for 10 minutes, then gently shape the blanket to its original size.
No, do not dry clean your Sunbeam electric blanket. Dry cleaning solvents may damage the wires.
Unplug the power cord from the wall outlet. Check that the control is tightly connected to the module in the blanket. Re-plug the power cord into the wall outlet.
Sunbeam heated bedding will not feel hot to the touch when laid out flat. If your blanket is not heating properly, reset the blanket using the steps above. If resetting doesn't work, contact Sunbeam support.
