Why Electrical Tape Is Perfect For Bike Handlebar Finishing

Electrical tape can be used to finish the handlebars of a bike. It is often used underneath handlebar tape for aesthetic reasons, but it can also be used on its own. Some people prefer to use other types of tape, such as hockey tape, or even twine, as electrical tape can leave behind a black goo as it shrinks.

Electrical tape is a good option for finishing handlebars, but it can leave black goo behind as it shrinks

Electrical tape is often used underneath handlebar tape for aesthetic reasons. For example, red, blue, yellow or white electrical tape can be used under Cinelli tape to create a nice colour contrast.

If you are looking for a tape that is easy to hold onto and keeps the edges from curling up, cotton handlebar tape is a good option. Hockey tape is also a good alternative to electrical tape as it is water-resistant and made of cloth.

When using electrical tape, it is important to cut it rather than just pulling it apart. You can also heat a screwdriver with a flame and give the tape a little tac weld.

Cotton bar tape is easy to hold onto and keeps the edges from curling up

It seems that electrical tape is often used to finish the handlebars of bikes. However, cotton bar tape is also used and is easy to hold onto and keeps the edges from curling up. It also has a clean, glossy finish.

Some people prefer to use electrical tape underneath the cotton bar tape, as it looks nice and is a little wider. It is also used for aesthetic reasons, with some people using red, blue, yellow or white electrical tape underneath the cotton tape.

If you are looking for an alternative to electrical tape, hockey tape is a cloth, very water-resistant tape used on hockey sticks that works great on bike handlebars.

If you are not afraid to go old-school, finishing with twine is classy and holds better than any tape.

Hockey tape is a cloth, water-resistant tape that works well on handlebars

If you are looking for a tape that is very stretchy and will not leave a gooey residue, hockey tape is a good option. It is also worth noting that several manufacturers have started shipping good-quality, branded finishing tape with their bar tape. So, if you are purchasing new bar tape, you may not need to buy additional finishing tape.

If you are not afraid to go old-school, finishing with twine is another option. Twine holds better than any tape and gives a classy look.

Nitto brand electrical tape can be welded with a heated screwdriver

It is common to use electrical tape to finish bike handlebars. Nitto is a brand of electrical tape that can be welded with a heated screwdriver. To do this, heat a screwdriver with a flame and give the tape a little tack weld. Nitto electrical tape is designed to withstand high temperatures, optimise operational efficiency and extend equipment lifespan. It is available in a range of colours, including black, white, brown, and clear.

Some manufacturers now ship good branded finishing tape with their bar tape

It is common to use electrical tape to finish the handlebars of a bike. However, some manufacturers now ship good branded finishing tape with their bar tape. For example, Cinelli, Bontrager, and Planet Bike have all switched from using cheap vinyl finishing tape to good, stretchy, thick finishing tape within the last few years.

Electrical tape is fine for a glossy, clean finish, but it is not very stretchy and leaves nasty black goo behind as it shrinks. Some people prefer to use hockey tape, which is a cloth, very water-resistant tape used on hockey sticks. Others opt for an old-school finish with twine, which holds better than any tape.

If you are using electrical tape, it is recommended to heat a screwdriver with a flame and give the tape a little tac weld. When you finish the electrical tape, make sure to cut it rather than just pulling it apart.

Frequently asked questions