Jetson Electric Bike: Waterproof Or Not?

The Jetson electric bike is water-resistant, but not waterproof. This means that while it can get wet in the rain, you should avoid submerging it in deep water as this can damage the electrical components and battery. To ensure the longevity of your bike, it is recommended that you slow down, brake early, and watch for slippery surfaces when riding in the rain. After riding in wet conditions, it is important to wipe down your bike, clean the chain and battery contacts, and protect the battery during travel.

Jetson electric bikes are water-resistant, but not waterproof

If you do submerge your Jetson electric bike in water, treat it like a drowned phone: remove the battery immediately, let it dry completely for several days, then reassess. You can also protect your Jetson's battery on long, rainy rides by using a custom cover or makeshift waterproofing.

When riding in the rain, slow down, brake early, avoid leaning too much, and watch for slippery surfaces to maintain control and safety. Use safety gear like lights and reflective clothing.

You can ride a Jetson electric bike in the rain, but you should avoid submerging it in deep water

Jetson electric bikes are water-resistant, meaning you can ride them in the rain. However, you should avoid submerging them in deep water as this can damage the electrical components and battery. If you do ride in the rain, slow down, brake early, avoid leaning too much, and watch for slippery surfaces to maintain control and safety. After your ride, wipe down your bike, clean the chain and battery contacts, and protect the battery during travel.

After riding in the rain, wipe down your Jetson bike with a dry cloth

Jetson electric bikes are water-resistant, but they are not waterproof. This means that you can ride your Jetson electric bike in the rain, but you should avoid submerging it in deep water as this can damage the electrical components and battery. After riding in the rain, it is important to wipe down your Jetson bike with a dry cloth. This will help to remove any excess water and prevent water damage. You should also clean and re-lube the chain/drivetrain and dry the battery contacts using compressed air if needed. Proper maintenance will help to keep your bike in top shape and prevent water damage. In addition, you should avoid charging your bike immediately after riding in the rain. Instead, let it dry fully first to avoid potential issues.

Clean and re-lube the chain/drivetrain

Jetson electric bikes are water-resistant, but not waterproof. This means that you can ride them in the rain, but you should avoid submerging them in deep water as it can damage the electrical components and battery. After riding in the rain, you should wipe down your bike with a dry cloth, clean and re-lube the chain/drivetrain, and dry the battery contacts using compressed air if needed. This proper maintenance will keep your bike in top shape.

• Park your bike on a flat surface and engage the brake to keep it stationary.
• Shift the gears to the smallest chainring at the front and the largest cog at the back. This will give you better access to the chain and drivetrain components.
• Using a clean, dry cloth, wipe down the chain, chainrings, and cogs to remove any visible dirt, grime, or debris.
• Apply a small amount of degreaser to a clean cloth or brush and work it into the chain, chainrings, and cogs. Allow the degreaser to sit for a few minutes to break down any built-up grease and grime.
• Use a clean, dry cloth to wipe away the degreaser, along with any remaining dirt and grime. Ensure that you reach all areas of the chain and drivetrain, including the gaps between the links and the teeth of the chainrings and cogs.
• Once the chain and drivetrain are thoroughly cleaned, apply a small amount of bicycle chain lubricant to the chain. Rotate the pedals slowly to work the lubricant into the chain and ensure that it reaches all parts of the drivetrain.
• Wipe away any excess lubricant with a clean, dry cloth.
• Shift through the gears to ensure that the chain and drivetrain are functioning smoothly.

By following these steps, you can help maintain the performance and longevity of your Jetson electric bike's chain and drivetrain. Regular cleaning and lubrication will reduce friction, improve shifting performance, and extend the life of these critical components.

Dry battery contacts using compressed air

Jetson electric bikes are water-resistant, but not waterproof. This means that they can get wet in the rain, but you should avoid submerging them in deep water as it can damage the electrical components and battery. After riding in the rain, it is recommended that you wipe down your bike with a dry cloth, clean and re-lube the chain/drivetrain, and dry the battery contacts using compressed air if needed. This proper maintenance will keep your ride in top shape.

To dry the battery contacts using compressed air, follow these steps:

• Remove the battery from the bike.
• Use compressed air to blow away any moisture or debris from the battery contacts. Ensure that you hold the compressed air can or nozzle at least 6 inches away from the contacts to avoid any potential damage.
• Reinstall the battery into the bike once the contacts are completely dry.
• If you have a custom cover or makeshift waterproofing for your battery, use it to provide added protection from moisture.
• Avoid charging the battery immediately after exposure to water. Let it dry fully first to avoid potential issues.

By following these steps, you can effectively dry the battery contacts of your Jetson electric bike using compressed air and help maintain the longevity of your bike.

Frequently asked questions