Trystan Casey
The Philips Avent electric breast pump is designed to be easy to assemble and clean. The pump is compatible with Philips Avent bottles and provides comfort and convenience for effective expression. It features Rhythmic Wave Technology, which mimics a baby's suckling rhythm, and comes with a soft massage cushion. To assemble the pump, place the cushion into the pump body, ensuring the rim covers it. Push the inner part of the cushion into the funnel up to the line indicated by an arrow, then press the cushion around the rim of the funnel. Next, place the silicone diaphragm into the pump body, pressing down with your thumbs to ensure a perfect seal. Attach the tube(s) and cap(s) to the silicone diaphragm(s), then connect the tube(s) to the motor unit port. Finally, plug the motor unit into a wall socket using the provided power adapter.
| Characteristics | Values |
|---|---|
| Assembly | Place the cushion into the pump body, ensuring the rim covers it. |
| Push the inner cushion into the funnel up to the line (indicated by an arrow). | |
| Place the silicone diaphragm into the pump body and press down to seal. | |
| Attach the tube(s) and cap(s) to the diaphragm, then connect to the motor unit port. | |
| Plug the motor unit into a power socket with the provided adapter. | |
| Usage | Wash hands and breasts with soap and water. |
| Center the breast pump on the breast, with the nipple centered. | |
| Press and hold the power button to turn on; the pump will start in stimulation mode. | |
| Use the 'level up' and 'level down' buttons to adjust the suction level. | |
| The pump will automatically switch to expression mode after 90 seconds. | |
| To turn off, press and hold the power button. | |
| Cleaning | Wash all parts that come into contact with breast milk in a dishwasher, or by hand in warm soapy water. |
| Sterilize the parts that contact milk in a Philips Avent steam sterilizer or by boiling for 5 minutes. | |
| Wipe the pump motor, silicone tube, cap, and power adapter with a soft cloth. | |
| Compatibility | Compatible with Philips Avent bottles. |
| Uses both non-rechargeable and rechargeable batteries. |
Explore related products
What You'll Learn
Place the cushion into the pump body
To place the cushion into the pump body, follow these steps:
Firstly, place the cushion into the pump body, ensuring that the rim of the cushion covers the pump body. This is an important step to get right as it ensures the pump functions properly and no milk is lost. Next, push the inner part of the cushion into the funnel. Push it up against the line, which is indicated with an arrow. Make sure the edges of the cushion are properly sealed around the pump body. You can check this by running your finger around the rim of the funnel, making sure the cushion is secure.
You can place the cover over the cushion to keep the breast pump clean and protected when not in use.
Science Perk: Boosting Electric Damage in Fallout 76?
You may want to see also
Explore related products
Insert the valve
To insert the valve into your Philips Avent electric breast pump, first ensure that the valve is clean. You can clean the valve by gently rubbing it between your fingers in warm soapy water. Take care not to insert any objects into the valve as this may cause damage.
Once the valve is clean, locate the pump body. The pump body is the main container into which all the other components will be placed. Take the white valve and insert it into the pump body from underneath. Push the valve in as far as it will go. Make sure that the valve is securely in place by giving it a gentle tug.
Next, you will need to screw the pump body onto the bottle. Hold the bottle in one hand and the pump body in the other. Screw the pump body onto the bottle in a clockwise direction until it is tightly secured. Again, test that it is secure by giving it a gentle tug.
Now that the valve is in place, you can move on to the next step of assembling your breast pump.
Transforming Electric Lamps: A DIY Guide to Battery Power
You may want to see also
Explore related products
Screw the pump body onto the bottle
To screw the pump body onto the bottle, first ensure that you have inserted the white valve into the pump body from underneath. Push the valve in as far as it will go. Next, screw the pump body onto the bottle in a clockwise direction. Keep turning until it is securely fixed in place. You should now be able to insert the stem into the silicone diaphragm. Push the stem through until it reaches the end.
The next step is to insert the silicone diaphragm into the pump body from the top. Press down with your fingers around the rim of the diaphragm to ensure a perfect seal. You can check that the seal is secure by gently pulling on the diaphragm to see if it holds. If the diaphragm is correctly attached, it should not come away from the pump body.
Now that the diaphragm is in place, you can attach the handle. Do this by hooking the hole in the handle over the end of the stem. Push the handle down until it clicks into place. You should now have the pump body securely attached to the bottle, with the handle in place.
At this point, your Philips Avent breast pump should be almost fully assembled. The next steps will involve attaching the tubing and power adapter, so be sure to follow the manufacturer's instructions carefully to ensure correct assembly and avoid damage to the pump.
Cooling Rooms Electrically: Efficient and Eco-Friendly Methods
You may want to see also
Explore related products
Insert the stem into the diaphragm
To insert the stem into the diaphragm of your Philips Avent electric breast pump, first, place the silicone diaphragm into the pump body. Using your thumbs, press down on the diaphragm to ensure a perfect seal. Then, insert the stem into the diaphragm. Make sure that the stem is pushed through to the end.
The diaphragm is a critical component of the breast pump as it helps create a vacuum seal, enabling the pump to express milk. It is important to handle the diaphragm with care and ensure that it is cleaned and sterilised properly after each use. Before inserting the stem, check that the diaphragm is securely fitted into the pump body and sealed correctly.
The stem is an essential part of the breast pump's mechanism, as it connects the diaphragm to the handle, allowing the pump to be operated manually. When inserting the stem, ensure that it is pushed all the way through the diaphragm. A proper connection between the stem and the diaphragm is crucial for the effective functioning of the pump.
To maintain the integrity of the breast pump and ensure its longevity, it is important to follow the assembly instructions carefully. Refer to the user manual for detailed guidance on assembling and maintaining your Philips Avent electric breast pump. With proper care and assembly, your breast pump will provide comfort and convenience for effective milk expression.
Electric Shower Buying Guide: Power Considerations
You may want to see also
Explore related products
Attach the tube and cap
To attach the tube and cap of your Philips Avent electric breast pump, follow these steps:
First, insert the stem into the silicone diaphragm, ensuring that the stem is pushed through until the end. The silicone diaphragm is an important component of the pump as it helps to create a seal and ensure the pump functions properly. Next, attach the tube or tubes onto the silicone diaphragm. The tube or tubes are responsible for transporting the breast milk from the pump to the collection bottle. Push the tubes firmly onto the diaphragm to ensure a secure connection.
After attaching the tube or tubes, attach the cap or caps onto the other end of the tube or tubes. The cap helps to seal the tube and prevent any leakage. Make sure that the cap is tightly secured to the tube to avoid any spills or accidents. Once the cap is in place, attach the tube or tubes to the motor unit port. This connects the tube and cap assembly to the main pump mechanism, allowing for the suction and transportation of breast milk.
It is important to note that these components, including the pump motor, silicone tube, cap, and power adapter, should not be washed or sterilised. Instead, wipe them clean with a soft cloth or tissue. By following these steps, you will be able to securely attach the tube and cap assembly to your Philips Avent electric breast pump, ensuring a proper seal and efficient milk collection.
Understanding Your PC's Electric Consumption
You may want to see also
Frequently asked questions
The Philips Avent electric breast pump is designed to be easily assembled and cleaned. Here are the steps to assemble the pump:
- Place the cushion into the pump body and ensure that the rim covers the pump body.
- Push the inner part of the cushion into the funnel against the line indicated by an arrow, and make sure the edges of the cushion are sealed around the pump body.
- Place the silicone diaphragm into the pump body.
- Attach the tube(s) and cap(s) onto the silicone diaphragm(s).
- Attach the tube(s) to the motor unit port.
- Plug the motor unit into the wall socket with the provided power adapter.
Here are the steps to use the Philips Avent electric breast pump:
- Wash your hands thoroughly with soap and water, and ensure your breast is clean.
- Place the breast pump kit onto your breast, centring your nipple.
- Press and hold the on/off button until the device switches on.
- The breast pump starts in stimulation mode and slowly increases its vacuum to the last used stimulation suction level (or level 5 when used for the first time).
- Use the 'level up' and 'level down' buttons to change the suction level to your preference.
- After 90 seconds, the breast pump will automatically switch to expression mode and slowly increase its vacuum to the last used expression suction level (or level 11 when first used).
Here are some tips for cleaning the Philips Avent electric breast pump:
- Never wash or sterilise the pump motor, the silicone tube, the cap, and the power adapter. These components do not come into contact with breast milk, but you can wipe them clean with a soft cloth.
- You can use a dishwasher (top rack only) or hand wash the other parts in warm, soapy water, then rinse thoroughly.
- Sterilise all parts that come into contact with breast milk in a steam steriliser or by boiling for 5 minutes.
