Otis Singleton
Pigeon's GoMini Plus Electric Breast Pump is a user-friendly device that provides a hands-on approach to milk expression. The pump comes with a detailed instruction manual that covers correct handling, troubleshooting common issues like low suction pressure and leakage, and important safety guidelines. To assemble the pump, it is essential to ensure that all parts are correctly put together, particularly the milk valve and inner cup, as incorrect assembly can lead to air leaks and weak suction. The suction level can be adjusted for comfort, and the pump has two modes: stimulation and expression. For any issues or concerns, Pigeon Customer Care is available for assistance.
| Characteristics | Values |
|---|---|
| Assembly | Ensure all parts are assembled correctly and securely, especially the milk valve and inner cup. |
| Suction Pressure | Low suction pressure may be due to incorrect assembly, incomplete seals, or torn milk valves. |
| Leakage | Check for torn or damaged inner cups when experiencing water or milk leakage. |
| Motor Unit | Contact Pigeon Customer Care for issues with the motor unit, such as water or milk leakage. |
| Modes | The pump has two modes: stimulation and expression. The latter is for when a let-down occurs. |
| Suction Level | The suction level can be adjusted for comfort. |
| Safety | Basic safety precautions should be maintained when using electrical products, especially around children. |
| Warranty | Pigeon Electric Breast Pumps come with a 6-month warranty for the motor unit. |
Explore related products
What You'll Learn
Correct handling
Firstly, always refer to the product manual for assembly instructions. Ensure all parts of the breast pump are assembled correctly, especially the milk valve and inner cup. The milk valve should not be pushed too hard into the pump body, as this can result in weak suction power.
To switch on the pump, press and hold the ON/OFF button. The pump will initially be in stimulation mode. When a let-down occurs, you can switch to Expression mode by pressing the Mode Switch button. The suction level can be adjusted to your preferred comfort level.
If you experience low suction pressure, first check that all parts are assembled securely. Ensure the funnels are completely sealed around the breasts and that the milk valves are not torn. If the issue persists, contact Pigeon Customer Care for further assistance.
In case of water leakage at the bottom motor unit, you may continue the pumping session. After completing the session, disconnect the tubing from the motor unit and let it run for 30 minutes to eliminate any remaining water. To prevent this issue, avoid washing the tube and ensure the inner cups are intact.
If there is milk leakage from the motor unit, turn off the unit and inspect the inner cup for any tears or damage. If the inner cup is intact and the motor unit is functional, you may continue pumping. Otherwise, contact Pigeon Customer Care for guidance.
Basic safety precautions should always be maintained when using electrical products, especially around children. Keep the appliance away from individuals with reduced physical, sensory, or mental capabilities, unless they are under the supervision of a responsible person.
Electrical Testing: How Often is Enough?
You may want to see also
Explore related products
Low suction pressure
If you are experiencing low suction pressure with your Pigeon electric breast pump, there are a few things you can do to troubleshoot the issue. Firstly, ensure that all parts of the pump are assembled securely and correctly. This includes making sure that the funnels are completely sealed around your breasts, with no gaps between your breast and the flange. It is also important to check that the milk valves are not torn, as this can cause air leaks and weak suction. If the milk valve has been pushed too hard into the pump body, this can also result in reduced suction power.
If you are using the Pigeon GoMini Plus Electric Breast Pump, you can adjust the suction level to your comfort level. This may help to improve the suction pressure if it is set too low. Additionally, the Pigeon GoMini Plus comes with two cushion sizes—regular and large—to ensure a proper fit. A correct fit is crucial to achieving good suction and preventing air leakage.
If you have checked all the parts and adjusted the settings, and you are still experiencing low suction pressure, it is recommended to contact Pigeon Customer Care for further assistance. They can provide guidance and support to help resolve the issue.
Remember to always refer to the product manual for detailed instructions on assembling and using your Pigeon electric breast pump correctly.
Infrared vs Electric Heaters: Which is the Better Option?
You may want to see also
Explore related products
Water and milk leakage
If you notice water leakage at the bottom motor unit, you can continue the pumping session. After completing the session, disconnect the tubing from the motor unit and turn it on to run for 30 minutes to eliminate any remaining water. To prevent water leakage, avoid washing the tube and ensure the inner cups are intact.
If there is milk leakage from the motor unit, turn off the unit and inspect the inner cup for any tears or damage. If the inner cup is undamaged and the motor unit is functional, you may continue pumping. However, if the motor unit is not operational, contact Pigeon Customer Care for assistance.
To prevent milk leakage, ensure that all parts of the Pigeon GoMini Plus Electric Breast Pump are assembled correctly. The product manual provides detailed instructions on assembly, troubleshooting, and addressing leakage issues.
Preventing Electrical Interference: Inverters and Their Impact
You may want to see also
Explore related products
Stimulation mode
The Pigeon GoMini Plus Electric Breast Pump has two modes: stimulation mode and expression mode. The pump will be in stimulation mode by default when you switch it on. This mode gently stimulates the breast to initiate milk flow.
To switch on the Pigeon GoMini Plus Electric Breast Pump, press and hold the ON/OFF button. The pump will start in stimulation mode. When a let-down (sudden gush of breast milk) occurs, you can switch to expression mode by pressing the Mode Switch button. This mode maximises milk flow.
The suction level can be adjusted to your level of comfort. If you experience low suction pressure, ensure all parts are assembled securely. Check if the funnels are completely sealed around the breasts and also make sure your milk valves are not torn. If there is still low suction pressure, please contact Pigeon Customer Care.
The Pigeon GoMini Plus Electric Breast Pump complies with IC 60601 standards. It is recommended to use a Pigeon steam sterilizer for steam sterilization. When using an electric steam sterilizer, follow its operating instructions. Do not use dry heat or a dishwasher/dryer to sterilize the parts as this may cause deformation or damage. Parts are hot immediately after sterilizing, so use caution to avoid injury. Assemble the parts after washing and sterilizing.
Mixing Cakes Without Electric Mixers: Easy Hand-Mixing Techniques
You may want to see also
Explore related products
Expression mode
The Pigeon GoMini Plus Electric Breast Pump has two modes: stimulation mode and expression mode. The pump turns on by default in stimulation mode, which gently stimulates the breast to initiate milk flow. Once a let-down (a sudden gush of breast milk) occurs, press the Mode Switch button to switch to Expression mode. This mode maximises milk flow. The suction level can be adjusted to your preferred level of comfort.
To ensure the Pigeon Electric Breast Pump works effectively, it is important that all parts are assembled correctly, especially the milk valve and inner cup. If the milk valve and inner cup are torn, there will be air leakage and the suction will be weak. Suction power can also be affected if the milk valve is pushed too hard into the pump body.
To maintain the hygiene of the Pigeon Electric Breast Pump, it is recommended to sterilise the parts after washing. Do not use dry heat or a dishwasher/dryer to sterilise the parts, as this may cause deformation or damage. Parts are hot immediately after sterilising, so use caution to avoid injury.
Finding Electrical Runs: A Guide for Apartments
You may want to see also
Frequently asked questions
Press and hold the ON/OFF button to switch on the pump.
The Pigeon electric breast pump turns on in the stimulation mode by default.
When a let-down (sudden gush of breast milk) occurs, press the Mode Switch button to switch to Expression mode.
Ensure all parts are assembled securely. Check if the funnels are completely sealed around the breasts and also make sure your milk valves are not torn.
