Beatrice Lang
Refilling an e-cigarette is a simple process, but it varies depending on the type of device and tank you have. There are two main types of e-cigarettes: closed system devices, which use pre-filled tanks or cartridges that need to be replaced, and open system devices, which allow you to manually refill the e-liquid. Most modern devices fall into the latter category and offer a variety of filling methods, including top-filling and bottom-filling tanks. Before refilling, it's important to prime the coil, especially if it's your first time using the device or if you've installed a new coil. To prime the coil, simply ensure that the wick is completely wet to prevent burning. Once primed, you can refill your tank by removing the mouthpiece or unscrewing the bottom segment, tilting the device at an angle, and gently squeezing the e-liquid down the sides of the tank, being careful not to overfill it.
How to fill up your electric cigarette
| Characteristics | Values |
|---|---|
| Type of vape | Closed system vaping device, open system vaping device |
| Type of tank | Top-filling, bottom-filling |
| Type of pod | Closed, top-fill |
| When to refill | When the cartomizer needs replacing, when the tank is nearly empty |
| How to refill | Remove mouthpiece, unscrew bottom segment of tank, tilt device, squeeze e-liquid down sides of tank, screw mouthpiece/bottom cap back on, wipe away excess e-liquid; remove rubber bung, insert nozzle of e-liquid bottle, tilt vape pod, insert e-liquid, push rubber bung back in, wipe away excess e-liquid |
| What to look out for | Weaker hit, burnt flavour, gurgling sound |
Explore related products
![Tenro Aroma Oil Refill Pack [Hickory Flavor] - 4 x 10ml Bottles + 4 Containers | Food Grade, Natural Flavoring | Compatible with Tenro & Most Cocktail Smoke Bubble Guns](https://m.media-amazon.com/images/I/61MmfevN2ZL._AC_UL320_.jpg)
What You'll Learn
Identify your tank type: top-fill, bottom-fill, or closed system
There are two types of vape tanks: top-fill and bottom-fill. There are also closed-system vaping devices, which cannot be manually refilled.
Top-fill tanks are filled from the top, typically by unscrewing the top cap or sliding it open to reveal the filling ports. Many people prefer this type of tank because you can refill it without removing it from your vaping device. This makes the process quicker and easier, and lowers the chance of spills.
Bottom-fill tanks, on the other hand, need to be removed from the vaping device and turned upside down to be refilled. This process is not extremely complicated, but it takes a little longer and is less convenient if you are in a hurry or on the move.
Closed-system vaping devices have e-liquid contained within a tank or cartridge that cannot be manually refilled. When the e-liquid runs out, you simply unscrew the old tank or cartridge, discard it, and screw a new one back on.
Scooting Through Security: Airplane Check-ins for E-Scooters
You may want to see also
Explore related products
![Tenro Aroma Oil Refill Pack [ Apple Flavor] - 4 x 10ml Bottles + 4 Containers | Food Grade, Natural Flavoring | Compatible with Tenro & Most Cocktail Smoke Bubble Guns](https://m.media-amazon.com/images/I/61IUPJOW4wL._AC_UL320_.jpg)
Prepare the tank for filling: remove mouthpiece/unscrew
To prepare your electric cigarette tank for filling, you need to first determine what type of tank or pod system you have. There are two main types: closed and open systems. Closed system vaping devices have a tank or cartridge that contains the e-liquid and cannot be manually refilled. Instead, you simply unscrew and discard the old tank or cartridge and screw on a new one.
On the other hand, open system vaping devices allow you to manually top up the e-liquid. Within open systems, there are different types of filling methods depending on the design of the tank. The majority of modern tanks have a top-fill system, but some tanks are bottom-filling.
If you have a top-fill tank, you will need to remove the mouthpiece to access the filling port. Some tanks require the top or bottom to be unscrewed to open the tank, while others have a sliding mechanism or a cap that needs to be twisted sideways. Always refer to the instructions provided with your specific tank to determine the correct method for opening it.
For bottom-filling tanks, you will typically need to unscrew the bottom segment of the tank or remove the tank from your device and turn it upside down. By tilting the tank slightly, you can avoid getting e-liquid in the central tube, which is the airflow passage.
Revamping Antique Electric Fan Bases with Paint
You may want to see also
Explore related products
Prime the coil: wet the wick to prevent burning
Priming your vape coil is a simple process, but it's important to do it right to avoid a burnt taste and a ruined coil. The priming process ensures that the wick is fully saturated with e-liquid before you start vaping. This is especially important when using your coil for the first time, and you only need to prime a new coil when installing it.
To prime your coil, start by installing a new coil into the base of your tank. Most coils have a wick made from cotton, and this is what you want to saturate with e-liquid. For standard coils, drip a couple of drops of e-liquid directly into the hole in the top of the coil. If your coil doesn't have a hole at the top, drip the e-liquid into the holes at the side. If you're using larger coils, you can also add a few drops onto the exposed cotton through the holes around the coil. Be careful not to over-saturate the coil, as this could lead to leaking.
Once you've applied the e-liquid to the coil, it's time to fill up your tank. Ideally, fill it to the top to ensure the wick will be fully saturated. Leave the tank to sit for 15-30 minutes. Thicker e-liquids with a higher level of VG (vegetable glycerin) will take longer to absorb, so keep that in mind.
After waiting, you can speed up the process by taking a few gentle draws on the mouthpiece without pressing the battery button. The suction will help pull the liquid into the wick. If you feel like there's too much airflow, you can cover the airflow area with your finger to reduce it.
Once you've primed your coil, your e-cigarette is ready to use! Remember to always prime a new coil before vaping to avoid burning the wick and ruining the flavour.
Cooling Your Shed: Natural Ways to Beat the Heat
You may want to see also
Explore related products
Fill the tank: tilt, avoid central tube, don't overfill
Filling a vape tank is a simple process, but it's important to do it right to avoid damaging your device and to ensure a good vaping experience.
Firstly, you need to identify what type of tank you have. Most modern tanks are top-fill, but some are bottom-fill. You should check your product instructions to be sure. Top-fill tanks are recognisable by their removable mouthpiece, which is located below the mouthpiece. Bottom-fill tanks will need to be removed from the device and turned upside down to be refilled.
Once you know what type of tank you have, it's time to fill it up. If you have a top-fill tank, you'll need to press a button or twist the top hardware to open it. If your tank has a child-proof cap, you may need to twist and push or pull to open it. With a bottom-fill tank, you'll need to remove the bottom hardware to access the refillable section.
Now you're ready to fill the tank. Slightly tilt your device and gently squeeze the e-liquid down the sides of the tank, avoiding getting any in the central tube. This is important because the central tube is the airflow, and you don't want e-liquid in your mouth. Fill the tank to your desired level, but don't overfill it. Leave a bit of room for the tank's hardware, and don't fill past the internal tube, as this can cause leaking and damage to your device.
Finally, screw the mouthpiece or bottom cap back on, and you're ready to vape.
MERV Rating's Impact: Energy Usage and Costs
You may want to see also
Explore related products
Seal the tank: screw/push back on mouthpiece/base
Once you have filled your e-cigarette tank, you need to seal it. The method for doing this will depend on the type of tank you have. If you have a bottom-filling tank, you will need to replace the bottom hardware. This may involve screwing it back on or pushing it back into place. If your tank has a rubber bung covering the filling port, push the bung back into place to seal the tank.
If you have a top-filling tank, you may need to screw or slide the top back onto the tank. If your tank has a lid, you will need to replace it. If your tank has a mouthpiece, screw this back on.
It is important to leave a small gap at the top of the tank to prevent overflowing and leaking.
Aircon Electricity Consumption: Plugged In, Switched Off?
You may want to see also
Frequently asked questions
Most e-cigarettes have see-through windows on their tanks or cartridges, so you can easily see when you’re running low on e-liquid. If your cartomizer is opaque, look out for a weaker hit, reduced flavour or a burning taste, which means it needs replacing.
The method for refilling your e-cigarette depends on the type of tank or pod you have. Firstly, check your product instructions to see if your tank is a top or bottom-filling tank. Top-filling tanks are refilled at the top, while bottom-filling tanks need to be turned upside down. Once you’ve opened your tank, insert the nozzle of the e-liquid bottle into the port and fill it with e-liquid at a slight angle to prevent air pockets. Leave a small gap at the top to prevent overflowing and leakage, then seal the port and wipe away any excess liquid.
How often you refill your e-cigarette depends on how often you vape. Always refer to your user manual for guidance.
