Concealing Cables For A Clean Electric Fireplace Look

Hiding cables for an electric fire can be a tricky task, but there are several solutions to achieve a sleek and modern look. The easiest way is to place the fire close to an electric socket, avoiding the need for extension leads, which can be unsafe. If you need to run the cable along a wall, you can use trunking, which is usually made of PVC and can be painted to match your decor. Alternatively, cable organizer kits can be used to bundle cables together, and in-wall cord routing can be achieved by cutting holes in the wall and using fish tape or wire snake tools to guide the cables. For a more complex solution, a media wall can be constructed, with an opening for easy access to the plug and socket.

Place electric fires near wall sockets

The easiest way to hide your electric fire cable is by placing your electric fire close to a wall socket. This way, you can avoid using extension leads, which can be a safety hazard and create an extra cable to hide.

If your electric fire is already near a wall socket, there are still some steps you can take to make the cable less noticeable. You could use a cable organiser kit to keep the wire neat and out of sight. These kits typically include clips, sleeves, or boxes for bundling cables and are easy to install.

If you want to go the extra mile, you could try in-wall cord routing. This involves cutting holes in the wall to hide the cables completely. You can use a stud finder to locate safe spots for drilling and fish tape or wire snake tools to guide the cables through the wall.

If you don't want to cut holes in your wall, you could consider using trunking to conceal and protect your cables. Trunking is usually made of PVC and can be placed along your skirting boards. It comes in various shapes and sizes, and you can paint it to match your wall for added concealment.

Remember, when dealing with electricity and fire, always put safety first. If in doubt, consult a professional electrician for advice or assistance.

Use cable organiser kits

Cable organiser kits are a great way to keep your electric fireplace cords neat and out of sight. These kits typically include clips, sleeves, or boxes for bundling cables. They are easy to install and provide a cleaner look instantly.

To use a cable organiser kit, you will need to first plan the route for your cords. If you are routing the cords through the wall, you will need to cut holes in the wall and use fish tape or wire snake tools to guide the cables through. It is important to use a stud finder first to locate safe spots for drilling. Once the cables are through the wall, you can secure them in place using cable ties or Velcro strips to ensure they stay neat and tidy.

Another option is to use a power bridge kit, which includes an outlet box, cover plates, and fish wires adaptable for IOS devices. This provides a cleaner and safer connection for your electric fireplace.

If you want an even more modern solution, you can opt for wireless remote control outlets. These allow you to turn your electric fireplace on and off from anywhere in the room without touching the device or its cables. Simply install a receiver into the wall outlet and plug your fireplace cord into it.

Cable organiser kits are a simple and effective way to manage the chaos of electric fireplace cords and keep your space looking tidy and clutter-free.

Install in-wall cord routing

In-wall cord routing is an effective way to hide electric fireplace cables. This method involves cutting holes in the wall to thread the cables through, ensuring they are completely hidden from view.

Firstly, use a stud finder to locate safe spots for drilling. It is important to be aware of the local code requirements before drilling or cutting into walls. For example, the US electrical code only allows "permanent power wiring" in walls, and some types of cables are considered "temporary power wiring" and are not permitted.

Once you have identified the safe spots, cut holes and use fish tape or wire snake tools to guide the cables through the drywall. These tools help to pull the cables through the wall safely and efficiently. Ensure you follow local regulations and take the necessary safety precautions when working with electricity and drilling into walls.

After threading the cables through the wall, install a power bridge kit to make the connections cleaner and safer. These kits include an outlet box, cover plates, and fish wires that are adaptable for IOS devices. They ensure that the connections are secure and up to code.

Finally, secure all wires neatly behind the wall using cable ties or Velcro strips. This ensures that the cables remain organised and hidden from view. You can also consider using wireless remote control outlets, which allow you to operate your fireplace from anywhere in the room without touching the device or its cables.

Use trunking to conceal cables

Trunking is a popular method for concealing cables for electric fires. It is a protective casing that encloses cables and can be placed along skirting boards or walls. Trunking is usually made of PVC, but it can also be made of steel, glass-reinforced polyester, or galvanised rigid conduit. PVC is the most popular material for trunking because it is lightweight, affordable, and resistant to moisture and corrosion. It can also be painted to match the surrounding decor.

Trunking is an effective way to hide cables for electric fires because it is discreet and blends in with the surrounding area. It is also a safe option, as it protects cables from accidental damage and helps to prevent water damage, electrical fires, and electric shocks.

When using trunking to conceal cables for an electric fire, it is important to consider the length and placement of the trunking. It should be placed along the shortest distance to the adjacent socket and can be cut to size if needed. The trunking can be attached to the skirting board or wall using adhesive or other fixings.

In addition to trunking, there are other methods for concealing cables for electric fires. These include using cable organiser kits, in-wall cord routing, cable covers, cord concealers, or running the cord behind furniture. However, trunking is a simple and effective solution that can be used in conjunction with other methods, such as an electric suite or media wall, to create a cohesive and uncluttered space.

Overall, trunking is a versatile and practical solution for concealing cables for electric fires. It is a safe and discreet option that can be customised to match the surrounding decor. By using trunking, you can effectively hide cables and protect them from damage, creating a stylish and functional space.

Build a media wall

Building a media wall is a highly customisable option for hiding electric fire cables. You can build a media wall to take up an entire wall or sit out as a fake chimney breast. This method also allows you to hide other wires, such as those from your TV or gaming consoles. You can build in an opening, door, or panel in the side of the wall for easy access to the plug and socket. Variations include half-walls, panelling, and floating boxes.

If you don't want to build a media wall, there are other ways to hide electric fire cables. Firstly, consider the space you have and try to place your electric fire close to an electric socket. Avoid plugging the fire into an extension cable, as these are not designed to cope with the amount of power electric fires use and could be hazardous.

Trunking is another option for hiding electric fire cables. Trunking is primarily used to conceal and protect cables. It is usually made of PVC and can be placed along your skirting boards. It comes in many shapes and sizes, including curved, micro, and self-adhesive. You can also paint the trunking to match your wall or skirting boards for added concealment.

Cable organiser kits are another option for keeping wires neat and out of sight. These kits typically include clips, sleeves, or boxes for bundling cables. You can also use cable covers, cord concealers, or run the cord behind furniture.

If you want to go the extra mile, you can route your cables through the wall by cutting holes and using fish tape or wire snake tools. You can also install a power bridge kit for a cleaner and safer connection.

Finally, if there is no other way of concealing the cables, you can consider calling an electrician to wire in an electric fireplace. This would allow the cables to be hidden behind your wall.

Frequently asked questions