Umair Gaines
There are many ways to hide electrical cords behind a TV, ranging from simple to complex. One easy method is to bundle wires together with zip ties, clips, adhesive hooks, or coiled sleeves, and then place them behind a console or cabinet. Another option is to use a cable concealer kit or cable raceway, which is a flat PVC cover that attaches directly to the wall with adhesive, eliminating the need for drilling holes. For a more permanent solution, you can cut holes in the wall and install low-voltage brackets or boxes to run the wires through, but this requires more skill and effort.
| Characteristics | Values |
|---|---|
| Difficulty | Easy, medium, or hard |
| Cost | Free, cheap, or expensive |
| Tools required | Cable ties, cable concealer kit, adhesive hooks, paintbrush, etc. |
| Permanence | Temporary or permanent |
| Safety | Safe or potentially dangerous |
| Aesthetics | Sleek, seamless, or inconspicuous |
Explore related products
What You'll Learn
Hide cords behind a console or cabinet
If you're not interested in mounting your TV to the wall, you can still achieve a sleek look by placing your TV on a console, cabinet, or entertainment centre with an opening in the back to run cords through. Choose something with at least one cabinet door to place the cable box and/or router behind, then feed the cords through the back and up to the TV. You can bundle wires together using clips, zip ties, adhesive hooks, or coiled sleeves to further reduce the appearance of clutter.
Another option is to build your own TV stand with cord storage. You can follow instructions to create a recessed groove in the back leg, then run the cords for your TV and other entertainment devices down the groove in the leg to keep them out of sight.
If you're looking for a simpler solution, you can use cord covers, also known as cable raceways, to hide the cords. These are smooth, flat PVC covers that attach directly to the wall with adhesive, allowing you to avoid drilling additional holes. You can also paint them to match the colour of your wall.
If you're handy, you can cut two holes in the wall—one at the bottom of where the TV hangs and the second near the power outlet below. Low-voltage brackets or boxes need to be installed before running the wires from top to bottom. This allows cords to be plugged in at the entrance and exit points, giving you a blank canvas between the bottom of the TV and the top of whatever console or cabinet you place below it.
The Intricate Beauty of ELO's "Do Ya
You may want to see also
Explore related products
Use a cable concealer kit
If you want to hide electrical cords behind your TV, you could consider using a cable concealer kit. This method is ideal if you don't want to mount your TV to the wall or drill holes in the wall. Cable concealer kits, also known as cable raceways, are smooth, flat PVC covers that attach directly to the wall with adhesive. They are an effective way to conceal cables and cords without putting them behind a wall.
There are various cable concealing kits available on the market, such as the TV Cord & Cable Power Kit and the EchoGear TV & Soundbar Cable Concealer and Power Kit. These kits typically come with a corrugated plastic tube with connected outlets, a wall plate cover, a long extension cord, a hole saw bit for a power drill, a wire snake, and a paper template. The outlet power is attached to the plastic tube, which you place behind the wall by drilling two holes into the wall behind the TV. The TV cords are then threaded through the plastic tube, and the power cable is plugged into an existing wall electrical outlet.
Alternatively, you can use a cable concealer kit that attaches to the wall with adhesive, which doesn't require any drilling. These kits usually include a flat moulding-like cover, also known as a raceway or cable manager, which can be painted to match the colour of the wall or moulding in the room. This creates a concealed pass-through for the cords and wires.
Using a cable concealer kit is a straightforward way to hide electrical cords behind a TV without having to drill holes or put cords behind walls. It provides a clean and tidy finish to your home entertainment setup.
The Ultimate Guide to Greasing Your Chicago Rotary Hammer
You may want to see also
Explore related products
Cut holes in the wall and install low-voltage brackets
To hide electrical cords behind a TV, one effective method is to cut holes in the wall and install low-voltage brackets. This method requires careful planning and execution to ensure a safe and functional installation. Here is a step-by-step guide to help you through the process:
Mark the Wall:
Use a pencil to mark the wall and indicate the bottom edge of the TV where it will hang. This will help you determine the placement of the holes and brackets. Make sure to unplug the TV and disconnect all wires before proceeding.
Locate the Studs:
Use a stud finder to locate the studs, pipes, and wires behind the wall. The hollow space between the studs is where the wires and cords will run, so it's important to mark these locations with painter's tape and a writing instrument.
Mark and Cut the Holes:
Mark the top installation location at a point that will be concealed by the TV. The bottom exit hole should be marked as close to a power outlet as possible. Use a hole saw to cut through the drywall and create the holes.
Install Low-Voltage Brackets:
With the holes in place, it's time to install the low-voltage brackets or boxes. Push the bracket into the exit hole cavity and use a screwdriver to secure the box into place by turning the box tabs behind the wall.
Run the Wires:
Use a fish stick (also known as a fish tape or glow rod) to run the wires through the space behind the walls. The fish stick is a flexible rod with a small hook that helps pull the wires through. Insert the fish stick through the bottom exit low-voltage box and out through the top box, ensuring it protrudes from both holes. Tape the fish stick to the wall temporarily to keep it in place.
Conceal the Cords:
Once the low-voltage brackets are installed and the wires are in place, you can conceal the cords within the wall. Make sure the cords are long enough to reach the back of the TV and plug into the necessary components. The cords can now run from the top to the bottom of the installation, giving you a clean and efficient look.
It is important to note that working with electrical installations can be dangerous. If you are not confident in your skills or knowledge, it is always best to consult a professional electrician or seek advice from a reputable source.
Toothpaste and Electric Brushes: A Perfect Match?
You may want to see also
Explore related products
$9.82 $12.99
Bundle wires together with zip ties
If you're looking for a quick and easy way to hide electrical cords behind your TV, bundling wires together with zip ties is a great solution. This method is simple, inexpensive, and effective in reducing the clutter of cords.
To start, gather all the cords you want to conceal. It's important to identify which cord connects to which device, so labelling them can be helpful. Once you have identified each cord, use zip ties to bundle them together neatly. Zip ties, also known as cable ties, are inexpensive and can be found at most hardware stores. They typically come in black or white, but you can also find them in other colours to match your decor.
When bundling the cords, try to keep them as close to the wall as possible. This will help to minimise the appearance of bulkiness. If you have excess length in a specific cord, you can zip-tie it to itself to shorten it. You can also use zip ties to attach the bundled cords to the back of the TV stand or entertainment centre, keeping them secure and out of sight.
If you don't want to mount your TV on the wall, you can still use zip ties to manage the cords. Place your TV on a console, cabinet, or entertainment centre with an opening in the back to feed the cords through. Then, use zip ties to bundle the cords together and tuck them neatly behind the furniture. Choose furniture with cabinet doors to hide the cable box and router, further reducing visual clutter.
In addition to zip ties, you can also use cord clips to manage your TV cords. Clear cord clips, such as Command Cord Clips, can be adhered to the back edges of your furniture to guide the cords neatly down the legs of the console. These clips are inconspicuous and versatile, sticking to various surfaces like painted walls, tile, metal, and glass.
By bundling wires together with zip ties and utilising cord clips, you can effectively hide electrical cords behind your TV, creating a streamlined and organised look in your space.
Florida's Electric Chair: Is It Still in Use?
You may want to see also
Explore related products
Use a cable raceway
A cable raceway is a straightforward way to hide electrical cords behind a TV. It is a hollow channel that conceals the wires and cables of your electronic devices. Cable raceways are typically made of rigid plastic or metal and can be installed in a room in minutes. They are also easy to cut to fit any size or layout, meaning you can mount the TV wherever you prefer.
Before installing a cable raceway, it is important to create a plan for the layout. Identify an electrical source and hang your TV close to an outlet. Measure the distance from the installation point on the wall to the outlet, or from the ceiling to the wall outlet. This will ensure that your raceway is installed in the most efficient location to eliminate clutter without affecting the room's overall look.
To install a cable raceway, first bundle the cords together. Then, cut the base and top of the raceway cover using a hacksaw. Mount the raceway base to the wall with screws according to the manufacturer's instructions. Place the TV cords inside the channel and snap the cover in place over the top.
Raceways are typically sold in neutral colours like white or metallic grey. To seamlessly blend the raceway into your space, paint it the same colour as your wall using latex-based paint. Some raceways are also available with self-sticking adhesive backing, allowing you to attach them directly to the wall without drilling any additional holes.
Electric Dryers and GFCI: What's the Connection?
You may want to see also
Frequently asked questions
The most effective way to hide electrical cords behind a TV is to conceal them behind a wall. This method requires the most work but makes the cords virtually invisible from any angle. To do this, you'll need to cut two holes in the wall—one at the bottom of where the TV hangs and the second near the power outlet below. Then, install low-voltage brackets or boxes before running the wires from top to bottom.
A simpler way to hide electrical cords behind a TV is to use a cable concealer kit or a cable raceway. This is a smooth, flat PVC cover that attaches directly to the wall with adhesive, allowing you to avoid drilling additional holes. You can also bundle wires together using clips, zip ties, adhesive hooks, or coiled sleeves to reduce the clutter of cords.
If you don't want to mount your TV to the wall, you can place it on top of a console, cabinet, or entertainment center with an opening in the back to run cords through. Choose something with at least one cabinet door to place the cable box behind, then feed the cords through the back and up to the TV. You can also use decorative wall treatments like wainscoting, slatted wood paneling, or beadboard to conceal the cords.
A creative way to hide electrical cords is to incorporate built-in cord storage into the design of your TV stand. For example, you can create a recessed groove in the back leg of the stand and run the cords through it to keep them out of sight. You can also use decorative items such as books or plants to disguise and hide the cords.
