Trystan Casey
Electric scooters are an increasingly popular mode of transport, offering a convenient and eco-friendly alternative to cars and public transport. However, one issue that has been raised with their growing popularity is the lack of clear direction indication, with some scooters lacking turn signals altogether. This has led to concerns about safety, especially as other road users may be unfamiliar with the presence of electric scooters. While some scooters do have turn signals, these can be small and difficult to see. As a result, some riders use hand signals to indicate their direction, but this can be unsafe as it requires letting go of the handlebars. To address this issue, products such as WingLights by CYCL fit into the hollows of handlebars and flash bright amber with one tap, providing a safe and visible way to indicate.
| Characteristics | Values |
|---|---|
| Safety Gear | Always wear a helmet, knee and elbow pads |
| Learning to Ride | Find an open area with lots of space and little traffic |
| Familiarization | Know where all the controls are and how to operate them |
| Brakes | Electric scooter brakes vary, some have brake levers that need to be adjusted before riding |
| Indicators | Some scooters have turn signals, but these are often small and not very bright. WingLights by CYCL are turn signals that fit into the hollows of handlebars and flash bright amber with one tap |
| Lights | Press the power button once to turn on the lights, and again to turn them off |
| ECO Mode | Press the power button twice to enable ECO mode, which limits the scooter's speed and increases its range |
| Throttle | Thumb throttle controls your speed |
| Bluetooth | Connect your smartphone via Bluetooth to access more features |
| Battery | Rechargeable lithium-ion battery |
Explore related products
What You'll Learn
- Some electric scooters have built-in turn signals
- You can install bicycle turn signals on your scooter
- WingLights are a turn signal that fits into the hollows of handlebars
- Pressing the brake lever will make the rear light flash
- Indicator lights should be placed at the end of the handlebar for optimum visibility
Some electric scooters have built-in turn signals
Electric scooters are increasingly becoming a popular mode of transport, especially in urban areas. They are eco-friendly, convenient, and cost-effective. However, one of the key concerns surrounding their use is the lack of clear signalling for turning. This is an important safety issue, as it can lead to accidents if other road users are unsure of the rider's intentions.
Some electric scooters do come with built-in turn signals, but these can sometimes be small, dimly lit, and hard to see. Aftermarket turn signals are available, and some can be easily installed without the need for external wiring. For example, battery-operated bicycle turn signals can be attached to the handlebars, and some scooters have turn signals built into the handlegrips.
There are also options for wireless bicycle turn signals, with a tail light and arrows, and a thumb-operated pad on the left handlebar. These require you to press to indicate the direction and then press again to turn off the signal.
Another option is WingLights, which fit into the hollows of handlebars and flash bright amber with one tap, mimicking car indicators. They are made from aluminium, robust, shockproof, and waterproof, turning off automatically after 45 seconds.
In addition to turn signals, it is important to have proper lighting on your electric scooter to ensure your safety and the safety of others. A powerful headlight can illuminate the path ahead and make you more visible to other road users.
Concealing Kitchen Cords: Tips and Tricks
You may want to see also
Explore related products
You can install bicycle turn signals on your scooter
Electric scooters are a convenient and eco-friendly mode of transport. However, one issue that arises is how to safely signal your direction to other road users. The German Road Safety Council and the UK Transport Committee recommend the mandatory fitting of indicator lights on electric scooters.
The second option is to install electric scooter turn signals. These are brighter and better quality, but they require more work to install. You will need to attach the turn signal lights to your scooter by either drilling holes or making mounting brackets. You will also need to mount the switch to your handlebars.
There are a variety of turn signal kits available, which include lights, a flasher, and a handlebar switch. You can also buy blinkers separately, but make sure they are compatible with your lighting setup. If you are installing lights to the front of your scooter, ensure they have a high-beam option.
You can also buy turn signals that fit into the hollows of your handlebars and flash with one tap, mimicking the signalling of other vehicles. These are made from aluminium and are shockproof and waterproof.
It is important to note that signalling with your hands is still recommended, even with turn signals installed.
Fixing Your Bullet Electric Scooter: A Step-by-Step Guide
You may want to see also
Explore related products
WingLights are a turn signal that fits into the hollows of handlebars
Electric scooters are a convenient and eco-friendly mode of transport. However, one of the key issues with their use is the lack of turn signals or clear direction-indicating capabilities. This can lead to accidents, especially when other road users are unfamiliar with the presence of electric scooters on roads or cycle lanes.
WingLights are an innovative solution to this problem, acting as turn signals that fit into the hollows of handlebars. They are designed to emphasize the rider's direction intentions and improve overall visibility to other road users. With just one tap, WingLights flash bright amber lights, clearly notifying nearby road users about the rider's presence and turning intentions. This is similar to the signalling method used by other vehicles such as cars, making it more natural for other road users to understand. The position of the indicator lights at the end of the handlebars also offers optimum visibility, given the shape of electric scooters.
WingLights are easy to install and compatible with a range of electric scooters. They are designed to fit securely into the hollows of handlebars with an internal diameter ranging from 14.7mm to 23mm. Some models, like the WingLights Mag, can be attached magnetically to the mounters, which are then screwed into the handlebars. For handlebars that are not hollow or have a crescent shape, adaptors may be required to ensure a safe fit.
WingLights offer a hands-free signalling solution, addressing the safety concern of removing a hand from the handlebars, which can cause the rider to lose balance and wobble. With WingLights, riders can keep both hands on the handlebars while activating the turn signals with just their little finger. This helps maintain stability and control while riding, improving overall safety.
Ryobi 11 Amp Electric Mower: Is the Battery Worth It?
You may want to see also
Explore related products
Pressing the brake lever will make the rear light flash
Electric scooters are a fun, eco-friendly, and convenient mode of transport. However, one of the key issues with their use is the lack of turn signals or clear direction-indicating capability. This can lead to accidents, especially when other road users are unfamiliar with the presence of electric scooters.
One way to indicate your direction on an electric scooter is to use hand signals. However, this can be unsafe as it is easy to lose balance. Additionally, it may be difficult for other road users to see your hand signals, especially if the indicators are mounted too low, near the back wheel.
To address this issue, you can install WingLights on your electric scooter. WingLights are turn signals that fit into the hollows of your handlebars. With one tap, they flash bright amber, clearly indicating your direction to other road users. They automatically turn off after 45 seconds.
Another option is to install a brake light system that activates when you press the brake lever. This can be done by wiring the brake light to the brake switch. The brake switch wires will have a positive current flowing through them when the brake switch is in the closed position. When you press the brake lever, the brake switch informs the speed controller to turn the motor off and activate the brake light. This setup will make the rear light flash when you press the brake lever, clearly indicating to other road users that you are slowing down or stopping.
Electric Guitar Buying: Cheap Guitars Harder to Play?
You may want to see also
Explore related products
Indicator lights should be placed at the end of the handlebar for optimum visibility
Electric scooters are an eco-friendly and convenient mode of transport. However, one of the key issues surrounding their use is the lack of turn signals or clear direction-indicating capability. This can lead to accidents, especially when other road users are unfamiliar with the presence of electric scooters.
To address this issue, the German Road Safety Council has recommended the mandatory fitting of indicator lights on electric scooters. Similar recommendations have been made by the UK Transport Committee, the Association of British Insurers, TfL, and Pure Electric. Having signalling capabilities similar to those of cars and mopeds can help make direction intentions clear and integrate electric scooters as part of the road network.
One option for adding turn signals to electric scooters is WingLights by CYCL. WingLights are turn signals that fit into the hollows of handlebars and, with one tap, flash a bright amber light, mimicking the signalling method of other vehicles. The position of the indicator lights at the end of the handlebar offers optimum visibility given the shape of the electric scooter. This placement ensures that the indicators are not mounted too low, as is often the case with indicators placed near the back wheel, and provides clear direction indication for other road users.
Additionally, WingLights 360 models offer a permanent sidelight function, with white front-facing and red rear-facing lights, improving visibility, especially for road users approaching from behind. By using WingLights, riders can keep both hands on the handlebars, minimising the risk of losing balance, which can be an issue when using hand signals. Overall, the placement of indicator lights at the end of the handlebar on electric scooters can enhance safety and visibility for riders and other road users.
Electric Baseboard Heaters: Dry Air or Moisture Preserver?
You may want to see also
Frequently asked questions
Electric scooters do not always have built-in indicators, so you may need to use hand signals. However, this can be unsafe as it requires you to let go of the handlebars. You can buy turn signals to install on your scooter, such as WingLights, which fit into the hollows of your handlebars and flash bright amber with one tap.
First, make sure your scooter is fully charged. Then, press the power button once to turn on the lights. To enable ECO mode, which limits the scooter's speed and increases its range, press the power button twice. Press the power button twice again to disable ECO mode and return to full speed. Finally, press and hold the power button to turn the scooter off.
Electric scooters have a brake lever, which will make the rear light flash when pressed.
