Wiktor Wise
The Braun 7893s electric shaver is a cordless, silver device that can be used for shaving both the face and the head. It features two shaving heads, five personalized modes, and a Protective SkinGuard to protect the skin while shaving. The speed of the blades can be adjusted using the two buttons on the front of the device, with the left button reducing the intensity for sensitive skin and the right button increasing the intensity for coarser beards. The lithium-ion battery provides up to 50 minutes of cordless shaving on a full charge, and a 5-minute quick charge for a single shave. To use the shaver, move it up and down repeatedly with light pressure, keeping all three blades in constant contact with the skin.
Explore related products
What You'll Learn
Charging the shaver: Plug in and charge before first use
Charging the Braun 7893s electric shaver for the first time is simple. First, plug the power cord into the shaver and into a power outlet. The lithium-ion battery will take approximately one hour to fully charge, providing 50 minutes of cordless shaving. If you need a quick shave, a five-minute charge will suffice for a single use. The LED display panel will indicate the battery status.
It is important to note that the Braun 7893s shaver has a limited number of charge/discharge cycles. The lithium-ion battery will wear down over time, holding less charge. Therefore, it is recommended to recharge the shaver when the red light illuminates, indicating a low battery.
To ensure optimal battery performance, it is advisable to store the shaver with a partial charge when not in use for extended periods. Specifically, Apple recommends storing lithium-ion batteries at 50% charge if they will be unused for more than six months.
Additionally, while it may be tempting to run the battery down completely to test its limits, this is generally not recommended for lithium-ion batteries. Instead, the shaver can be used until the red light illuminates, indicating that the battery is close to being fully discharged.
Repairing Electric Keyboard Keys: A Step-by-Step Guide
You may want to see also
Explore related products
Adjusting the settings: Two buttons to increase or reduce intensity
Adjusting the settings on your Braun 7893s electric shaver is a straightforward process, allowing you to personalise your shaving experience. This shaver is equipped with two buttons located on the front, which enable you to increase or decrease the intensity of the shave.
The left button is for those with sensitive skin, reducing the intensity for a gentler shave. Conversely, the right button increases the intensity, catering to individuals with coarser beards who require more power. The colour of a small light on the shaver will change to indicate the setting: light blue for sensitive skin and dark blue for a more intense shave. You will also hear an audible signal when adjusting the settings, confirming the change.
The Braun 7893s also offers five personalised modes, allowing you to adjust the shaver according to the specific area of your face you are working on. This feature, combined with the adjustable intensity settings, ensures a comfortable and customised shaving experience.
Additionally, the Braun 7893s is designed with a Protective SkinGuard, which further enhances the comfort of your shave. This feature gently protects your skin while maintaining a close shaving experience. Whether you have sensitive skin or a coarser beard, the adjustable settings and protective features of the Braun 7893s electric shaver cater to your specific needs.
Conductors of Electricity: Examples and Their Unique Properties
You may want to see also
Explore related products
Using the shaver: Move up and down with light pressure
To operate the Braun 7893s electric shaver, you need to use up-and-down strokes, not circular motions. Move the shaver up and down repeatedly with light pressure. Avoid applying too much pressure, as this may cause skin irritation or discomfort.
The Braun 7893s is designed with three blades that should be kept in constant contact with the skin for the most comfortable and effective shave. This ensures that all the hairs are captured and cut evenly.
The shaver also has floating foils that conform to the contours of your face, allowing you to maintain constant contact with the skin even in tight spaces and around curves. This helps you achieve a smooth and close shave without applying excessive pressure.
Additionally, the Braun 7893s features adjustable settings to personalise your shaving experience. You can adjust the intensity by pressing the buttons on the front of the shaver. Pressing the left button reduces the intensity for more sensitive skin, while pressing the right button increases the intensity for coarser beards. The setting change is indicated by a colour change in the small light—light blue for sensitive skin and dark blue for a more intense shave.
By following these instructions and moving the shaver up and down with light pressure, you can effectively utilise the Braun 7893s electric shaver to achieve a comfortable and close shave.
Customizing Your Razor X: Modding Guide
You may want to see also
Explore related products
$64.99 $68.99
Rinsing the shaver: Remove the head and rinse under the tap
Rinsing your Braun 7893s electric shaver is a simple process. First, you need to remove the shaving head. Braun shavers use a cassette system, which means the blades and foils are merged into a single piece. This is the part you need to remove. Once you have the cassette in hand, rinse it under the tap, making sure to clean both the outside and the intricate inner part rigorously. It is recommended to clean your shaver like this after every use to avoid dirt becoming lodged inside.
You can also rinse the two inner blades without detaching them from the shaver. However, it is important to note that you should never use the cleaning brush directly on the foils. The brush is only suitable for the inside of the cassette and for removing hair strands from the pivoting head unit.
If you want to give your shaver a more thorough clean, you can use a small amount of liquid soap and water. You can also use a cleaning spray to remove all traces of sebum. After cleaning, make sure to dry the blades and foils before reassembling and storing your shaver. Leaving water inside the head can cause it to develop an unpleasant smell over time.
Finally, to maintain optimal performance, put a single drop of oil on the cutter block occasionally.
Grounding Electric Fences: Winter Preparation Tips
You may want to see also
Explore related products
Storage: Store in the custom shell case
The Braun 7893s electric shaver comes with a custom shell case for storage and travel. This case is designed to keep your shaver protected and secure when not in use or during transportation. Here are some detailed instructions on how to properly store your Braun 7893s electric shaver in the custom shell case:
- Ensure the shaver is turned off: Before placing the shaver into storage, make sure that it is switched off by pressing the power button. The Braun 7893s has an LED display that will indicate whether the device is on or off.
- Clean the shaver: It is important to maintain proper hygiene for your electric shaver. Rinse the shaving head under running water to remove any hair clippings, gel, or foam residue. Dry the shaving head and the body of the shaver with a clean, dry cloth before storing.
- Detach and store accessories: If you have any accessories attached to your shaver, such as a trimming comb or a protective cap, detach them and place them in the designated compartments within the custom shell case. This ensures that all the components are organised and easy to access when needed.
- Place the shaver in the case: Position the electric shaver securely inside the custom shell case. The case is designed to snugly fit the shaver, providing a safe and compact storage solution.
- Store the case in a safe location: Choose a storage location that is dry, clean, and away from extreme temperatures. Avoid placing heavy objects on top of the case to prevent any potential damage.
By following these steps, you can ensure that your Braun 7893s electric shaver is properly stored and maintained when not in use. The custom shell case provides a convenient and protective storage solution, making it easy to store and transport your shaver safely.
Hawaiian Electric Stock: What's Behind the Downward Trend?
You may want to see also
Frequently asked questions
Plug in your shaver and switch it on. It will then be in sleep mode. Use the power cable to activate it before its first use.
Move the shaver up and down repeatedly, not in circular motions. Apply light pressure and keep all three blades in constant contact with the skin.
The shaver can be adjusted by pressing down on one of the two buttons at the front. Press the left button to reduce the intensity for sensitive skin, and press the right button to increase the intensity for coarser beards. A small light will signal the setting change by its colour change (light blue = sensitive, dark blue = more intense).
Remove the shaver head and quickly rinse it under the tap.
