Trystan Casey
The Electro-Voice Evolve 30M and Evolve 50 are both speaker systems that can be paired with other devices via Bluetooth. The Evolve 50 can stream from a Bluetooth source, but it cannot be paired with other Bluetooth speakers. The Evolve 30M, on the other hand, can be paired with a mobile device via Bluetooth using the Electro-Voice QuickSmart Mobile application. This application also allows remote control of all audio, effects, and mix functions. Additionally, the Evolve 30M offers a range of onboard studio-quality effects, flexible system configuration options, and an impressive performance-to-size ratio.
Characteristics and Values
| Characteristics | Values |
|---|---|
| Speaker | Electro-Voice Evolve 30M, Electro-Voice Evolve 50, Electro-Voice Everse 8 |
| Connection type | Wired, Bluetooth |
| Setup | Follow the QuickStart Guide for Electro-Voice Everse 8 |
| Mobile app | QuickSmart Mobile app |
| Compatibility | iPadOS, Android |
| Download | Google Play Store (Android), Apple Store (iPadOS) |
| Wired connection | 1/4-inch or XLR cable to Channel 1 or 2 |
| Microphone connection | XLR or 1/4-inch cable to Channel 1 or 2 |
| Microphone recommendation | Connect to Channel 1, especially for condenser microphones |
| Bluetooth | High-resolution, low-latency |
Explore related products
$1298.99 $1398.77
What You'll Learn
Connecting Electro-Voice Everse 8 to a mobile device via Bluetooth
The Electro-Voice Everse 8 is a versatile loudspeaker that can be used as a floor monitor, kickback, or PA speaker. It is the first battery-powered loudspeaker from Electro-Voice and the first weatherized model of its type. The Everse 8 offers Bluetooth connectivity, allowing users to pair the speaker with a mobile device for audio streaming and control.
To connect the Electro-Voice Everse 8 to a mobile device via Bluetooth, follow these steps:
- Download the EV QuickSmart Mobile app: Go to the Google Play Store or the Apple Store and download the EV QuickSmart Mobile app, which is compatible with both Android and iPadOS devices.
- Enable Bluetooth on your mobile device: Make sure Bluetooth is turned on in your device's settings. If you are unsure how to do this, refer to online guides for Android or iPadOS.
- Power on the Everse 8: Turn on the Everse 8 speaker and ensure that the volume is turned down to prevent any loud pops during the connection process, as this can damage the speakers.
- Hold the INPUT 3/4 button: On the Everse 8, locate and press the INPUT 3/4 button until you see a four-digit code displayed on the screen.
- Select the Everse 8 on your mobile device: Open the Bluetooth settings on your mobile device, locate the Everse 8, and select it.
- Enter the four-digit code: Once connected, enter the four-digit code shown on the Everse 8 display when prompted on your mobile device.
- Link additional Everse 8 speakers (optional): If you have multiple Everse 8 speakers, you can link them wirelessly. After pairing one speaker via Bluetooth, sync the additional speakers with the touch of a button, without the need for extra cables.
- Select devices to link in the QuickSmart Mobile app: Open the QuickSmart Mobile app and choose the devices you want to link for audio streaming and control.
By following these steps, you can easily connect the Electro-Voice Everse 8 to your mobile device via Bluetooth, taking advantage of its wireless audio capabilities.
String Lights: Using Electrical Conduit for Easy Hanging
You may want to see also
Explore related products
Setting up Electro-Voice Evolve 30M in stereo
The Electro-Voice Evolve 30M is a compact and portable column speaker system that delivers superior sound quality and performance. It is designed for solo musicians/performers, small musical groups, and venues that require an easy-to-use and highly portable system. Here's a step-by-step guide on how to set up the Electro-Voice Evolve 30M in stereo:
Step 1: Unpack the System
The Electro-Voice Evolve 30M system includes a speaker array, a two-piece aluminium pole connector, a carry bag, and a powered subwoofer. Carefully unpack these components from their boxes and lay them out in your desired setup location.
Step 2: Assemble the Speaker and Subwoofer
The Evolve 30M features a quick and easy assembly process. Connect the two pieces of the aluminium pole together, and then attach the column speaker to the pole. The subwoofer and column speaker connect wirelessly without the need for cables.
Step 3: Position the System
Place the subwoofer on the floor or a stable surface, ensuring it is securely positioned. Then, insert the assembled pole and speaker into the dedicated slot on the subwoofer. Adjust the height and angle of the speaker to your preferred position.
Step 4: Connect Audio Sources
The Evolve 30M offers multiple input options for connecting audio sources. On the back of the subwoofer, you will find the onboard digital mixer, which is the control centre of the system. It features XLR and 1/4" jack inputs, as well as a dedicated stereo Bluetooth channel (Input 7/8) for connecting Bluetooth-compatible devices. Connect your desired audio sources to the appropriate inputs.
Step 5: Adjust Settings and Levels
Once your audio sources are connected, you can adjust various settings and levels using the digital mixer. Fine-tune the volume, equalisation, and any studio-quality onboard effects to achieve your desired sound. You can also control the system remotely via the Electro-Voice QuickSmart Mobile application, available on the Apple Store and Google Play. This app allows you to adjust system parameters and monitor multiple EVOLVE 30M systems simultaneously.
Step 6: Check Stereo Spread
To ensure your Electro-Voice Evolve 30M is set up correctly in stereo, you can perform a simple test. Stream Bluetooth audio through your phone and check the lateral spread of the pan in relation to your speaker setup. This will help you confirm that the stereo imaging and soundstage are as expected.
With these steps, you should now have your Electro-Voice Evolve 30M system set up and optimised for stereo sound reproduction. Enjoy your enhanced audio experience!
Electric Car Window Malfunction? Here's a Quick Fix
You may want to see also
Explore related products
Using a wired connection to link speakers
Connecting speakers to a receiver using a wired connection can be a challenging task, especially for home stereo systems. However, it is a straightforward process if the right steps are followed. Before connecting a speaker wire to a receiver, it is important to determine which wire is positive and which is negative. Typically, the silver wire is the positive wire, while the copper wire is the negative wire. In cases where the speaker wire is clear, look for printed markings on the ends of the wires, which will indicate the polarity.
Most speakers have labelled ports, making it relatively easy to connect the speaker wire to the receiver. The first step is usually to turn off the receiver. The sound system should have two wires, which should then be connected to the receiver terminals. The other end of the speaker wires can then be connected to the corresponding speakers. After turning on the receiver, the volume can be increased to ensure clear audio quality. This method can be used to connect a receiver to any speaker with an impedance of 6 to 16 ohms. It is important to confirm the speaker's impedance by checking the information manual before purchasing.
For bare speaker wires, there are a few connection options. One common method is to twist the wire around a metal post on the back of the receiver. Alternatively, a spring-loaded connector or a spring clip (also called a terminal post) can be used. The speaker wires are typically colour-coded to match the correct terminals, with red and black being the most common colours.
In-wall speaker wires can be connected to a receiver in a similar manner to an A/V stereo. It is important to unplug all the wires, split the wire ends, place them into the corresponding sockets, and lock them into place. Most speakers have two clearly labelled connecting wires, while some rare speakers have four conductor wires, which can be more challenging to connect.
Additionally, some speakers may have banana plugs, which are adapters that make it easier to plug and unplug the wires. Banana plugs can be inserted into the corresponding holes on the back of the receiver. It is important to ensure that the left and right speakers are connected to the appropriate jacks on the receiver.
Electric Meter Requirements for Multi-Family Homes: One or Two?
You may want to see also
Explore related products
Using a Bluetooth transmitter to connect speakers
To connect speakers using a Bluetooth transmitter, you will need to ensure that the transmitter is compatible with your speaker system.
Firstly, check if your speakers have a wired connection. Almost any speaker system will have a wired connection, and you will need to identify what type of connection it is. For example, an Aux to RCA hookup.
Then, you will need to purchase a Bluetooth transmitter that is compatible with your speaker's connection type. Some Bluetooth transmitters are battery-powered, while others can be powered by an external power supply. If you are using a battery-powered transmitter, you may need to turn it on each time you want to use the speakers via Bluetooth, and it may turn off if nothing is connected after a certain period.
Once you have the correct Bluetooth transmitter, you can plug it into the appropriate connection on your speaker. Depending on the distance between your devices, you may experience connectivity issues, so it is recommended to keep the transmitter within 20 feet of the speakers.
It is important to note that Bluetooth is not real-time, so there may be a delay in audio transmission to the remote speakers. Additionally, a source device can only connect to one Bluetooth device at a time.
Electric Blankets: Relief for Arthritis Aches and Pains?
You may want to see also
Explore related products
Connecting instruments and microphones to Electro-Voice Everse 8
The Electro-Voice Everse 8 is a versatile loudspeaker that can be connected to various sound sources, including instruments, microphones, and mobile devices. Here is a comprehensive guide on connecting instruments and microphones to the Everse 8:
Connecting Instruments to Everse 8:
To connect an instrument to the Everse 8, you will need to use the appropriate cables. The Everse 8 is equipped with Channel 1 and Channel 2 inputs, which can accommodate both 1/4-inch and XLR cables. Simply connect your instrument to either Channel 1 or Channel 2 using the corresponding cable. Ensure that the volume is turned down when connecting your instrument to avoid any potential damage to the speakers from loud pops.
Connecting Microphones to Everse 8:
The Everse 8 allows for microphone connectivity through XLR or 1/4-inch cables, similar to instrument connections. It is recommended to connect your microphone to Channel 1, especially if you are using a condenser microphone. Remember to always connect your microphone before turning on phantom power (+48V) and to turn off the phantom power before disconnecting to avoid any potential issues.
Additional Microphone Settings:
If you are using a condenser microphone that requires phantom power, connect it to Channel 1 and ensure that the phantom power is turned on. This is an important step to provide the necessary power to your condenser microphone.
Wireless Connectivity with Bluetooth:
The Everse 8 also offers wireless connectivity via Bluetooth, allowing you to connect your mobile device and stream audio. To pair your mobile device, download the EV QuickSmart Mobile app, which is compatible with both iPadOS and Android devices. Enable Bluetooth on your device and power on the Everse 8. Hold the INPUT 3/4 button until you see a four-digit code on the display. Open your device's Bluetooth settings, select the Everse 8, and enter the displayed code.
Additionally, if you have multiple Everse 8 speakers, you can link them wirelessly. Pair one speaker via Bluetooth, then sync the additional speakers with the touch of a button, eliminating the need for a tangled web of cables.
The Electro-Voice Everse 8 provides a flexible and user-friendly experience when connecting instruments and microphones, offering both wired and wireless options to suit your setup needs.
Schneider Electric's Random Drug Testing Policy: What to Know
You may want to see also
