Removing Nakto Electric Bike Batteries: A Step-By-Step Guide

how to remove battery from nakto electric-bike

Removing the battery from your Nakto electric bike is a simple process. Most Nakto models come with a removable battery, which can be charged on or off the bike. To remove the battery, you'll need to unlock it with the keys provided when you purchased the bike. Once unlocked, carefully remove the battery from the bike, taking care not to damage any wiring.

Characteristics Values
Battery location Typically, it’s either integrated into the frame or attached to the rear rack
Removal Unlock with the keys provided upon purchase
Charging Use the charger that came with the bike and plug it into an appropriate wall outlet
Reattaching Slide the battery back into its holder until it clicks into place, and lock it with the keys
Maintenance Keep the battery charged and store it in a cool, dry place away from extreme temperatures
Replacing Keep your hand on the bike during replacement, so it doesn't fall over

shunzap

Locating the battery

Some Nakto electric bike models may have a plug or connector that should be disconnected before attempting to remove the battery. Gently but firmly pull apart the connector, ensuring no damage to the wiring. When removing the battery, keep your hand on the bike so it doesn't fall over.

To locate the battery, take the seat down. There is a small blue bar under the seat; pull that bar up to turn the seat straight. Then, use the key provided to unlock the battery. With your left hand, turn the key to the left while pushing the key in. With your right hand, take the battery out.

Once the battery is removed, you can connect the charger that came with your Nakto bike and plug it into an appropriate wall outlet. When the battery is charged, slide it back into its holder until it clicks into place and lock it with the keys to secure it to the bike.

shunzap

Unlocking the battery

To unlock the battery, turn the key to the left with your left hand and push the key in at the same time. With your right hand, take the battery out. It is important to be gentle but firm when removing the battery to ensure no damage is done to the wiring.

Some models may have a plug or connector that should be disconnected before attempting to remove the battery. Gently but firmly pull apart the connector, ensuring no damage to the wiring.

Once the battery is unlocked and disconnected, carefully remove it from the bike. Keep your hand on the bike during the replacement so that it doesn't fall over.

shunzap

Disconnecting the battery

Firstly, locate the battery. This is usually either integrated into the frame or attached to the rear rack. Once you have found the battery, use the keys provided with your e-bike to unlock it. This will disengage the battery from the locking mechanism that secures it to the frame.

Some Nakto models may have a plug or connector that should be disconnected before attempting to remove the battery. Gently but firmly pull apart the connector, ensuring no damage to the wiring.

Now, you can carefully remove the battery from the bike. Keep your hand on the bike during replacement, so it doesn't fall over.

shunzap

Removing the battery

Some Nakto models may have a plug or connector that should be disconnected before attempting to remove the battery. Gently but firmly pull apart the connector, ensuring no damage to the wiring.

Now, carefully remove the battery from the bike. Keep your hand on the bike during replacement, so it doesn't fall over.

Once the battery is removed, you can connect the charger that came with your Nakto bike and plug it into an appropriate wall outlet.

shunzap

Reattaching the battery

To reattach the battery, slide it back into its holder until it clicks into place. Then, lock it with the keys provided with your e-bike to secure it to the bike. Make sure that all wires are connected correctly and that the battery kit is stored safely.

For optimal performance, keep your battery charged and try not to let it run entirely flat. Charge your battery every few weeks if not in use, and store it in a cool, dry place away from extreme temperatures.

Frequently asked questions

First, locate the battery. It is usually either integrated into the frame or attached to the rear rack. If your model has a removable battery, unlock it with the keys provided upon purchase. Once unlocked, carefully remove the battery from the bike.

Yes, some models may have a plug or connector that should be disconnected before attempting to remove the battery. Gently but firmly pull apart the connector, ensuring no damage to the wiring.

Use the keys provided with your e-bike to unlock the battery. This disengages the battery from the locking mechanism that secures it to the frame.

Most Nakto models come with a removable battery. However, if you are unsure, check your bike's manual or contact Nakto customer support.

Once the battery is removed, you can connect the charger that came with your Nakto bike and plug it into an appropriate wall outlet.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment