Unlocking Shimano Electric Bike's Speed: Removing Limiters

Removing the speed limiter on an electric bike can be done in a few different ways, depending on the make and model of the bike. It's important to prioritise safety when removing the speed limiter, and to ensure you have sufficient knowledge of the internal components of your bike. One method involves using a tuning kit, which fits onto the speed sensor and signals the controller with a false reading, allowing the motor to deliver power and enabling you to ride faster. Another method involves modifying the settings in the bike's software to adjust or disable the speed limiter. This may require cutting or disconnecting certain wires, so it's important to refer to online guides specific to your bike model.

Using a tuning kit

Tuning kits are a good option because they require no permanent modifications to your bike. This means that you can easily remove the kit if you need to.

To use a tuning kit, you will first need to locate the speed sensor on your bike. This is typically located near the wheel or motor. Once you have found the speed sensor, you can fit the tuning kit onto it.

It is important to note that altering the speed limiter on your electric bike may be illegal in some places. Additionally, modifying the speed settings on your bike may void the warranty. Always check your local laws and regulations before making any changes to your electric bike's speed limiter.

Modifying settings

To remove the speed limiter on your electric bike, you will need to open the software and navigate to the speed settings. From there, you can adjust or disable the speed limiter. Save your changes and restart the bike to apply the new settings.

The process of removing the speed limiter will depend on the make and model of your bike. You may need diagnostic tools, screwdrivers, pliers, or other tools, so ensure you have all the necessary equipment before beginning. It is also important to prioritise safety. Wear appropriate gear such as gloves and protective eyewear, and use your tools correctly and carefully. Make sure you have sufficient knowledge of your bike's internal components.

To locate the speed sensor, refer to online guides specific to your bike model. The speed sensor is typically located near the wheel or motor. Depending on your bike's design, you may need to cut or disconnect certain wires.

After making adjustments, test the bike to ensure the speed limiter has been removed. You may also need to recalibrate your e-bike's systems.

Locating the speed sensor

To remove the speed limiter, you will need to modify the wiring. This may involve cutting or disconnecting certain wires, depending on your bike's design. You can refer to online guides specific to your bike model for more detailed instructions.

One method of removing the speed limiter is by using a tuning kit. This fits onto the speed sensor and signals the controller with a false reading, telling it that you're travelling under the limited top speed when you're not. As a result, the motor will continue to deliver power, allowing you to ride faster. Tuning kits have the advantage of requiring no permanent modifications, so you can easily remove them if needed.

After making any adjustments, be sure to test your bike to ensure the speed limiter has been successfully removed. You may also need to recalibrate your e-bike's systems.

Modifying wiring

Removing the speed limiter on an electric bike requires several tools, depending on the make and model of the bike. It is important to wear appropriate safety gear such as gloves and protective eyewear, and to use tools correctly and carefully.

Depending on your bike's design, you may need to cut or disconnect certain wires. Refer to online guides specific to your bike model. You will need to locate the speed sensor, which is typically located near the wheel or motor. Once you have located the speed sensor, you can modify the wiring by cutting or disconnecting the wires that connect to it. Be sure to test the bike after making any adjustments to ensure the speed limiter has been removed.

It is worth noting that removing the speed limiter may require recalibrating your e-bike's systems. Additionally, one method of removing the speed limiter is with a tuning kit, which fits onto the speed sensor and signals the controller with a false reading. This requires no permanent modifications and can be easily removed if needed.

Disconnecting the battery

When disconnecting the battery, carefully follow the instructions specific to your bike model. Refer to online guides or manuals to locate the battery and understand the correct procedure for disconnecting it. This process may vary depending on the make and model of your electric bike. Take your time and work carefully to avoid any damage to the battery or other components.

Once you have located the battery, identify the correct tool to disconnect it. This could be a screwdriver or another specialised tool. Again, refer to the instructions specific to your bike model to ensure you are using the correct tool. Gently loosen or remove any screws or fasteners securing the battery in place. Be cautious not to apply too much force, as this could damage the battery or surrounding components.

After disconnecting the battery, set it aside in a safe place. Ensure that the battery is stored securely and away from any potential hazards. If you are not planning to reinstall the battery immediately, consider storing it in a cool, dry location to maintain its optimal condition. Remember to handle the battery with care at all times to prevent any accidental damage.

Frequently asked questions