The Ultimate Guide To Cleaning Your Electric Bike

Electric bikes are advanced technology, and proper maintenance ensures they continue to perform at their best. Regular careful cleaning not only extends the lifespan of your e-bike but also contributes to a smooth and efficient riding experience. When washing an E-bike, pay attention to the electrical components. Turn off the E-bike before washing. Ensure the E-bike battery is locked in place. If you ride with the EnergyPak Plus, remove it prior to washing. Make sure the cap over the charger port is secured. Do not wash your E-bike upside down.

Cleaning the wheels and tyres

When it comes to cleaning the wheels and tyres of your electric bike, there are a few things to keep in mind. First, make sure the tyres are inflated to the recommended pressure. Then, check for any embedded debris in the tyres and wheels, and remove it. Next, follow the standard bike-cleaning procedure: spray your foaming bike wash all over the wheels and tyres, leave it for a minute, then agitate with a soft brush to break down the dirt. Finally, give the wheels and tyres a gentle rinse with plain water.

It's important to note that you should avoid using strong chemical cleaners on your electric bike, as they can damage plastic parts. Instead, opt for a bike-specific wash or a waterless e-bike wash, and always dry your bike fully before storing it.

Using a brush to remove dirt

When washing an electric bike, it's important to pay attention to the electrical components. Before you start, make sure the bike is turned off and the battery is locked in place. If you ride with an EnergyPak Plus, remove it. Make sure the cap over the charger port is secure.

Spray your electric bike with a foaming bike wash, then leave it for a minute or so to start working. Agitate the spray with a soft brush to break down the dirt, paying extra attention to any areas of stubborn muck. Use a brush to reach hard-to-get-to places, such as behind the bottom bracket. You can also use a brush to clean your drivetrain, using a degreaser. Removing the abrasive paste that can develop on a chain and gears will prolong their life. After brushing, rinse your bike with a gentle, low-pressure spray of plain water.

Avoid using strong chemical cleaners, as these could damage plastic parts. It's best to use a bike-specific wash. Always dry your electric bike fully before storing it.

Cleaning the drivetrain

To clean the drivetrain, you can use a foaming bike wash or a waterless e-bike wash. First, give the bottle a good shake, then spray all over your e-bike, and leave it for a minute or so to start to work. Next, agitate with a soft brush to break down the dirt, paying extra attention to any areas of stubborn muck. Then, give your e-bike a rinse off, again with a gentle low-pressure spray of plain water.

After cleaning the drivetrain, you should dry your e-bike fully before storing it. Residual water left sitting on electrical components could cause damage. Bounce the bike a few times on the ground to shake off excess water. Using a microfiber towel or other highly-absorbent cloth, wipe down the bicycle with special attention to bolts and electrical connections.

Drying the bike

If you don't want to use water, you can use a waterless e-bike wash. Simply spray it on and gently wipe it off with a soft microfiber cloth. Use another clean microfiber cloth to buff the bike back to a shine.

Cleaning the electric components

When it comes to cleaning the electric components of an e-bike, there are a few key things to keep in mind. Firstly, always turn off the bike before you start cleaning. It's also important to ensure that the battery is locked in place, and if you ride with an EnergyPak Plus, remove it before cleaning. Make sure the cap over the charger port is secured.

When cleaning the electric components, use a damp cloth to wipe down the battery and motor. Avoid using strong chemical cleaners, as these could damage the plastic parts covering the motor, battery, and control unit. Instead, opt for a bike-specific wash or a waterless e-bike wash, which can be sprayed on and gently wiped off with a soft microfiber cloth.

After cleaning, it's crucial to dry the bike thoroughly before storing it. Bounce the bike a few times on the ground to shake off excess water, then use a microfiber towel or another highly absorbent cloth to wipe down the bike, paying special attention to bolts and electrical connections. Make sure all connection ports are dry before putting the battery back in.

Frequently asked questions