Wiktor Wise
The Electro-Harmonix Silencer is a noise gate pedal that helps musicians reduce unwanted noise. It features a built-in effects loop that allows users to place noisy pedals within it to manage unwanted noise. The Silencer can be connected in two ways: by connecting the noisy pedals to the Silencer's effects loop or by connecting the Silencer directly to the amp's FX send and return. The optimal setup is to identify the noisy pedals and connect them to the Silencer's effects loop, allowing for better control over the sound. The Silencer is suitable for both guitar and bass and can be powered by a 9V DC power supply or a 9V battery.
| Characteristics | Values |
|---|---|
| Setup | Connect the amp’s FX SEND to the Silencer’s INPUT, the amp’s FX RETURN to the Silencer’s OUTPUT and then place your pedals into the Silencer’s FX loop. |
| Use | Identify noisy pedals and connect them to the Silencer's effects loop. The Silencer can also be used to gate the noise of a preamp. |
| Power Supply | Requires a 9V DC power supply or a 9V battery. |
| Adjustability | Adjustable threshold, reduction, and release controls make it adaptable to various instruments and playing styles. |
| Placement | Can be placed early in the chain to reduce noise from single coils. Can also be mounted underneath the pedalboard. |
Explore related products
What You'll Learn
Using the Electro-Harmonix Silencer's input jack
The Electro-Harmonix Silencer is a noise gate that can be used to manage unwanted noise from specific pedals without affecting the entire signal chain. It is suitable for both guitar and bass and can be used with an amp. The Silencer works best when it receives a dry guitar signal at its input jack.
To use the Silencer, connect your dry guitar or clean instrument to the Silencer's input jack. This allows the Silencer to determine when to open and close the gate, letting sound from the Silencer's effects loop come through the output jack or be muted. You can also connect the amp's FX send to the Silencer's input jack and the amp's FX return to the Silencer's output jack, especially if you want to use the Silencer to gate pedals in your amp's FX loop.
The optimal setup for the Silencer is to identify your noisy pedals and connect them to the Silencer's effects loop. You can put your entire pedalboard into the Silencer's effects loop, except for any delay or reverb effects. This setup gives you control over your sound by gating noise from specific pedals.
Additionally, you can try a slight modification by connecting the Silencer's send to pedals like a Tube Screamer and tuner, and then connecting the output of those pedals to the amp's input. This allows you to experiment with different configurations to find the optimal setup for your specific needs.
Troubleshooting Beeping Electric Dog Fences
You may want to see also
Explore related products
Connecting the amp's FX send to the Silencer's input
The Electro-Harmonix Silencer is a noise gate/effects loop pedal that can be used with both guitar and bass. It is designed to reduce unwanted noise from specific pedals without affecting the entire signal chain. The Silencer works best when it receives a dry guitar signal at its input jack, which allows the dry guitar to determine when the gate should open or close. This, in turn, controls whether the sound from the Silencer's effects loop is output or muted.
- Connect the output of your guitar to the Silencer's INPUT jack.
- Connect the amp's FX send to the Silencer's SEND jack.
- Connect the Silencer's RETURN jack to the amp's FX return.
- Connect any pedals that were in your amp's FX loop to the Silencer's SEND and RETURN jacks.
- Connect the Silencer's OUTPUT jack to the input of your amp.
This configuration allows the Silencer to process the signal from the amp's FX send while still allowing you to use the pedals in your amp's FX loop. It is important to note that the Silencer works best with a dry guitar signal, so you may need to fine-tune the THRESHOLD knob if the amp's FX send is already distorted.
Overall, the Electro-Harmonix Silencer is a versatile and effective tool for reducing noise and maintaining a clear and defined tone.
Understanding Your Electricity Bill: Units to kWh
You may want to see also
Explore related products
Using the Silencer's effects loop
The Electro-Harmonix Silencer is a noise gate tool that can be used to manage unwanted noise from specific pedals without affecting the entire signal chain. The optimal setup for the Silencer is to identify all your noisy pedals and connect them to the Silencer's effects loop.
To connect your pedals to the Silencer's effects loop, start by connecting your dry guitar to the Silencer's input jack. This allows your dry guitar to determine when the noise gate should open or close. When the gate is open, the sound from the Silencer's effects loop will come through the Silencer's output jack. When the gate is closed, the sound from the effects loop will be muted at the output jack.
After connecting your dry guitar, connect the amp's FX SEND to the Silencer's INPUT, and the amp's FX RETURN to the Silencer's OUTPUT. You can then place your pedals into the Silencer's FX loop. It is common to put the entire pedalboard into the Silencer's effects loop, except for any delay or reverb effects.
The Silencer's effects loop allows you to tame either a single pedal or an entire effects loop, giving you control over your sound. The footswitch on the Silencer allows you to select whether the noise gate is engaged or in bypass mode. In bypass mode, the effects loop remains in your signal path even when the gate is bypassed.
Edison's Electric Legacy in Europe: Who's Responsible?
You may want to see also
Explore related products
Using the Silencer as a noise gate
The Electro-Harmonix Silencer is a noise gate pedal with a built-in effects loop. It can be used to manage unwanted noise from specific pedals without affecting the entire signal chain. The Silencer's three-control layout allows for precise fine-tuning to fit your system, instrument, and playing style. The Threshold control adjusts how much level is required to open the noise gate and allow a signal to pass through. The Reduction control regulates the degree to which the gated signal is reduced, with a variable range between -70dB and +4dB. The Release control determines how long the gate remains open after the signal drops below the Threshold, with a variable range between 8ms and 4 seconds.
When using the Silencer as a noise gate, it is important to connect it properly to your other equipment. The optimal setup is to connect your noisy pedals to the Silencer's effects loop. For example, if you want to gate all your distortion pedals, you would connect them as their own chain to the Silencer's effects loop. You can also use the Silencer as a gate at the input of your amp, but this may not be the most optimal setup.
Another important consideration when using the Silencer as a noise gate is the placement of your other pedals. It is recommended to place your reverb pedal between the noise gate and your amp to prevent your reverb from being gated. Additionally, some users have reported success with placing the Silencer early in their chain to reduce noise from single coils.
The Silencer is powered by a 9V DC power supply or a 9V battery, making it convenient for both pedalboard integration and standalone use. It is a versatile and effective noise gate that can be used with both guitar and bass, and its small size makes it easy to mount underneath your pedalboard. With its adjustable controls and dual functionality, the Silencer is a useful tool for musicians looking to manage unwanted noise in their setups.
Electric Sheep Dream: What Androids Imagine When They Sleep
You may want to see also
Explore related products
Adjusting the threshold
The Electro-Harmonix Silencer is a noise gate that can be adjusted to suit your playing style and setup. The threshold setting on the Silencer determines how much level is required to open the noise gate and allow a signal to pass through.
To set the threshold, you should first turn the threshold knob to the minimum setting, the reduction to maximum, and the release to minimum. This will give you the most extreme gating effect once the threshold is set correctly. You can then turn the threshold up until the noise disappears. If the gate remains open for too long, you can turn the threshold up gradually while testing it out.
The threshold setting will depend on your playing style and how you integrate the pedal into your setup. For example, if you adjust the volume of your guitar, you may need to adjust the threshold to ensure that the gate closes properly. Additionally, if you have a high-gain preamp or noisy pedals, you may need to fine-tune the threshold knob to get the desired effect.
The optimal setup for the Silencer is to connect your noisy pedals to its effects loop. This allows you to manage unwanted noise from specific pedals without affecting the entire signal chain. By connecting your dry guitar to the Silencer's input jack, you can control when the gate opens or closes, allowing sound to either come through or be muted at the output jack.
Nuclear Power: Electricity Generation Process Explained
You may want to see also
Frequently asked questions
The Electro Harmonix Silencer is a noise gate that can be placed at the beginning of your chain to reduce noise from the start. It is recommended to connect the noisy pedals to the Silencer's effects loop. You can also put your entire pedalboard into the Silencer's effects loop, except for any delay or reverb effects.
To connect the Electro Harmonix Silencer to your amplifier, you would first identify the noisy pedals and connect them to the Silencer's effects loop. Then, connect the Silencer's INPUT jack to the amplifier's FX SEND, and the Silencer's OUTPUT jack to the amplifier's FX RETURN.
Yes, the Electro Harmonix Silencer is suitable for both guitar and bass. It has adjustable threshold, reduction, and release controls, making it adaptable to various instruments and playing styles.
