Molly Ayala
La-Z-Boy products sometimes need to be disassembled for safe transportation. The company provides a video guide for disassembling and reassembling La-Z-Boy seat backs, which can be found on their website. This guide is useful for those who have purchased a new La-Z-Boy product and need to know how to safely take it apart for moving.
Characteristics and Values Table for Disassembling a Lazy Boy Electric Recliner
| Characteristics | Values |
|---|---|
| Guide Availability | A video guide is available for disassembling and reassembling La-Z-Boy seat backs. |
| Product Identification | Look for the Made in Britain flag on product photos to identify UK-manufactured La-Z-Boy products. |
Explore related products
What You'll Learn
Disassembling the backrest
To begin disassembling the backrest, carefully push the recliner forward so that the backrest is accessible and the arms are touching the floor. This angled position will give you easy access to the locking levers at the base of the backrest.
On each side of the recliner, near the base where the backrest meets the body, you will find the locking levers that keep the back securely attached to the main frame. Slide your flathead screwdriver into the space between the outside back and the arm, aligning it with the lever. Gently pry the levers up using the screwdriver until you hear a click or feel the lever release. This unlocks the brackets holding the backrest in place.
Now, stand behind the recliner and pull the backrest up and away from the chair. A gentle rocking motion can help if the backrest feels tight. Continue lifting until the backrest is fully detached. If your recliner has massage, heat, or other power features, carefully disconnect any attached wires before lifting the backrest off to prevent strain on the connectors and avoid accidental disconnections.
Once the backrest is removed, you can set it aside and continue with disassembling other parts of the recliner as needed. Remember to keep all the screws and levers in a safe place for reassembly.
Converting Nuclear Power to Electricity: The Process Explained
You may want to see also
Explore related products
Removing the seat
To remove the seat of your Lazy Boy electric recliner, first, extend the footrest and tip the recliner onto its back. This will give you access to the interior of the chair.
Next, locate the eight screws on the bracket that holds the seat frame to the recliner frame. You may need a screwdriver with a long handle or an extension to reach the screws. Once you've located the screws, use a flat-bladed screwdriver to unscrew them in a counterclockwise motion.
After removing the screws, carefully pull or push the pin through the frame to release the seat. On older models, there may be a pin holding the front of the seat to the recliner frame, so be sure to check for this and remove it before attempting to remove the seat.
Now, you can pull the seat up and away from the recliner frame. Your Lazy Boy electric recliner seat has been successfully removed! Remember to keep all screws and pins safe so that you can reassemble the chair if needed.
Electricity's Hazardous Nature: Understanding Voltage's Lethal Threshold
You may want to see also
Explore related products
$119.98 $129.99
Taking apart the armrests
Unfortunately, I do not have enough information to generate a response to your request. However, here is some general information on the topic of disassembling a Lazy Boy electric recliner:
To take apart the armrests of your Lazy Boy electric recliner, you will need to locate and remove the fasteners that secure the armrests to the chair's frame. This typically involves unscrewing bolts or screws, so have your screwdriver and socket set ready.
Begin by locating the screws or bolts that hold the armrest in place. These fasteners are often concealed, so look carefully underneath the armrest for any small indentations or holes that might indicate their location. Once located, use the appropriate screwdriver or socket size to remove these fasteners. Be sure to keep track of the removed screws or bolts, placing them safely aside so they do not get lost.
With the fasteners removed, gently lift and pull the armrest upwards and away from the chair frame. It may be necessary to wiggle or rock the armrest gently to loosen it, especially if it has been attached for a long time. Be cautious not to use excessive force, as you do not want to damage the armrest or the chair frame.
If the armrest seems stuck, carefully inspect the area for any additional fasteners that may have been missed. Sometimes, manufacturers use extra screws or brackets to secure the armrest, which can be easily overlooked. Additionally, check for any signs of adhesive or glue that might be holding the armrest in place. If this is evident, gently pry or wedge the armrest away from the frame, being careful not to damage the surrounding material.
Once the armrest is removed, set it aside safely and repeat the process for the opposite armrest if necessary. It is important to work carefully and methodically throughout this process to avoid damaging the recliner or any of its components.
Electric Distribution Systems: Fire Hazards and Prevention Methods
You may want to see also
Explore related products
Detaching the power supply
Unfortunately, I cannot find specific instructions for detaching the power supply of a Lazy Boy electric recliner. However, here is some general guidance on disassembling the recliner:
To detach the power supply of your Lazy Boy electric recliner, you will need to access the power supply unit, which is typically located underneath the chair. Begin by flipping the recliner over or placing it on its side to get a clear view of the underside.
Locate the power supply box, which is usually rectangular or square-shaped and houses the electrical components. It is often secured to the frame of the recliner with screws or other fasteners. Using the appropriate tools, carefully remove these fasteners, ensuring you have a safe and organised place to store them for reassembly later on.
Once the power supply box is detached, carefully disconnect any wires or cables that run from the box to other parts of the recliner. These may include wires connected to the motor, control panel, or other electrical components. Make sure to take note of where each wire connects and label them if necessary, so you can easily reassemble the power supply.
After all, the connections have been disconnected; you can set the power supply unit aside. Be sure to keep it in a safe place, as you will need it again when reassembling the recliner. If you are replacing the power supply, take note of the model and specifications so that you can obtain an appropriate replacement.
Remember to exercise caution when working with any electrical components and ensure the power source is disconnected before beginning any work on the power supply unit. If you are unsure about any aspect of the process, it is always best to consult a qualified technician or seek advice from the manufacturer.
Adjusting Your GE Fridge: A Quick Guide
You may want to see also
Explore related products
Separating the base
To separate the base of a Lazy Boy electric recliner, you will need to follow a few careful steps to ensure the process is safe and efficient. Before beginning, ensure you have the necessary tools, such as a screwdriver and any other specific tools recommended by the manufacturer. It is also important to wear the proper protective gear, such as gloves and safety goggles, to avoid any potential hazards.
Start by locating the mechanism that connects the base to the rest of the recliner. This could be a set of bolts, screws, or other fasteners. Using the appropriate tool, carefully loosen and remove these fasteners, making sure to keep them organized so you can remember where each piece goes during reassembly. Depending on the model of your Lazy Boy recliner, there may be additional connectors or wires that need to be disconnected at this stage, so be cautious and take note of their placement.
Once the initial fasteners have been removed, gently tilt the recliner forward or backward, depending on the model, to access the underside of the base. This will expose the underside of the mechanism and provide better access for the next steps. If your recliner has a backrest, ensure it is in the fully closed position to avoid any strain on the hinges during this process.
Now, you will need to locate any remaining connections between the base and the main body of the recliner. These could include wiring harnesses, mechanical linkages, or other components specific to your model. Using the appropriate tools and referring to the manufacturer's instructions if necessary, carefully detach these connections. Take special care with any wiring harnesses to avoid damage to the wires or connectors.
With all the connections between the base and the main body of the recliner released, you can now slowly and carefully separate the two sections. It is important to do this in a controlled manner to avoid any sudden movements that could cause damage or injury. If necessary, ask for assistance to ensure the process is safe and smooth. Once separated, place the base in a safe location, ensuring it is properly supported and cannot tip over.
By following these steps, you can successfully and safely separate the base of your Lazy Boy electric recliner. Remember to refer to official guidance or the manufacturer's instructions if you encounter any challenges during the process.
Double-Sided Prong Adapters: Electrical Convenience or Hazard?
You may want to see also
Frequently asked questions
You can refer to the video guide provided by Lazy Boy for disassembling and reassembling instructions.
The video guide can be found on the official Lazy Boy website.
You can contact Lazy Boy customer support for assistance, they will provide model-specific instructions.
Yes, before beginning, ensure you have the necessary tools and a clear workspace. Take pictures as you disassemble to help with reassembly, and keep all hardware organised.
