Pedego Electric Bike: Turning On And Riding Off

how to turn on a pedego electric bike

To turn on a Pedego electric bike, make sure the battery is fully inserted and the on/off switch is in the on position. Then, press the power button on the four-button selector located near the left grip on the handlebars to turn the meter on. Once the bike is on, you can turn the headlight on or off by pressing the power button. You can also turn the rear light on by pushing the 'rear light' button on the top of the battery.

Characteristics Values
Turning the bike on Ensure the battery is fully inserted and the on/off switch is in the on “ ” position.
Turning the meter on Press the power button (top button) on the four-button selector located near the left grip on the handlebars.
Turning the headlight on Press the Power Button. The Front Light icon will appear on the basic function screen.
Turning the headlight off Press the Power Button again.
Turning the rear light on Push the “rear light” button on the top of the battery.
Turning the rear light off Push the “rear light” button on the battery again.

shunzap

Make sure the battery is fully inserted and the on/off switch is on

To turn on a Pedego electric bike, make sure the battery is fully inserted into the bike and the on/off switch is in the on position. The on/off switch is located on the battery. Once the battery is fully inserted, press the power button on the four-button selector located near the left grip on the handlebars to turn the meter on. The power button is the top button.

The bike's lights are also operated from the battery. To turn the front light on, push the power button on the LCD meter. To turn the rear light on, push the 'rear light' button on the top of the battery. When the bike is on, press the power button to turn the headlight on or off. The front light icon will appear on the basic function screen when the headlight is on. If the setting for the light sensor is set to on in the advanced settings menu, the headlight will turn on automatically based on ambient brightness. When the headlight is on in this condition, the auto light icon will be displayed on the basic function screen.

shunzap

Press the power button to turn the meter on

To turn on a Pedego electric bike, you must first ensure that the battery is fully inserted into the bike and that the on/off switch is in the on position. Once you have done this, press the power button (the top button) on the four-button selector located near the left grip on the handlebars to turn the meter on. This will also turn on the headlight. To turn the headlight off, press the power button again. You can also turn the headlight on or off by pressing the '+' or '-' buttons to adjust the assist level.

The Pedego electric bike also comes equipped with an integrated rear light that operates from the battery. To turn the rear light on, push the 'rear light' button on the top of the battery. To turn the rear light off, push the button again.

shunzap

Press the power button to turn the headlight on or off

To turn on the headlight of your Pedego electric bike, make sure the bike is on and then press the power button. The front light icon will appear on the basic function screen when the headlight is on. To turn the headlight off, press the power button again.

If the setting for the light sensor is set to 'on' in the advanced settings menu, the headlight will turn on automatically based on the ambient brightness. When the headlight is on in this condition, the auto light icon will be displayed on the basic function screen.

Your Pedego also comes equipped with an integrated rear light that operates from the battery. To turn the rear light on, push the 'rear light' button on the top of the battery. To turn the rear light off, repeat pushing down the 'rear light' button on the battery.

shunzap

Press the '+' or '-' buttons to adjust the assist level

To turn on your Pedego electric bike, make sure the battery is fully inserted and the on/off switch is in the on position. Then, press the power button on the four-button selector located near the left grip on the handlebars. Once the bike is on, you can press the + or - buttons to adjust the assist level.

The + and - buttons are used to increase or decrease the level of assistance you receive from the bike's motor. This can be useful when riding in different conditions or when you want to conserve battery power. For example, you may want to increase the assist level when riding uphill or into a strong headwind. Conversely, you may want to decrease the assist level when riding on flat terrain or with a tailwind to extend your battery life.

In addition to adjusting the assist level, the + and - buttons can be used to activate other functions on the bike. Pressing and holding the + button will activate USB-C charging, allowing you to charge your devices on the go. On the other hand, pressing and holding the - button will enable walk mode, which is useful when you need to walk the bike instead of riding it.

You can also use the + and - buttons in the setting menu to navigate and make selections. Pressing these buttons will allow you to adjust various settings on your Pedego electric bike, giving you greater control over your riding experience.

shunzap

Press and hold the '-' button to enable walk mode

To turn on a Pedego electric bike, you must first ensure the battery is fully inserted and the on/off switch is in the on position. Then, press the power button (the top button) on the four-button selector located near the left grip on the handlebars to turn the meter on. Once the bike is on, you can press the power button to turn the headlight on or off.

To enable walk mode, press and hold the '-' button. This will only activate when the assist level is set to OFF. The '+' and '-' buttons are used to adjust the assist level. Pressing and holding the '+' button will activate the USB C charging.

Frequently asked questions

Make sure the battery is fully inserted into the bike and the on/off switch is in the on “|” position. Press the power button (top button) on the four-button selector located near the left grip on the handlebars to turn the meter on.

With the bike on, press the power button to turn the headlight on. Press the power button again to turn it off.

Push the “rear light” button on the top of the battery to turn the rear light on. To turn it off, push the button again.

Push the power button on the LCD meter to turn the front light on. To turn it off, push the power button again.

The active brake light will illuminate automatically when the brakes are engaged.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment