Wiktor Wise
PLP is a term used in commercial real estate that stands for PUBLIC LIGHT AND POWER. It is the common or public meter that powers equipment in basement areas such as boilers, furnaces, and water heaters. While it is generally referred to as PLP in the United States, specifically in New York City, it may be called the house or power meter in other places.
Explore related products
What You'll Learn
- PLP is an acronym for Public Light and Power
- PLP meters power equipment like boilers, furnaces, and water heaters
- If there is no separate meter for your unit, you are not responsible for paying for electricity
- In Australia, the common or public meter is called HOUSE
- In Canada, power utilities derive their power from dams, so meters are referred to as Hydro meters
PLP is an acronym for Public Light and Power
In some cases, tenants may be incorrectly billed for PLP if their landlord transfers the wrong account to them. It is the landlord's responsibility to install separate meters for each unit, and tenants are only responsible for paying for electricity through their own dedicated meter.
PLP is also used in the context of electrical inspections. For example, in New York City, some buildings require a PLP meter to pass inspection, even if there are no common spaces that require electricity.
The term PLP is used interchangeably with "house" or "power" meter in some regions. In upstate New York, for example, PLP stands for Public Light and Power. However, in other regions, such as Washington state, the term PP&L (Puget Power & Light) is used instead.
Static Electricity: Why It's So Shocking and What It Means
You may want to see also
Explore related products
PLP meters power equipment like boilers, furnaces, and water heaters
PLP stands for PUBLIC LIGHT AND POWER and is a term used in commercial real estate. PLP meters power equipment like boilers, furnaces, and water heaters, which are usually found in the basement.
If you are a tenant, you can ask your landlord to install a submeter for your unit. This way, you will only be responsible for the electricity you consume. Alternatively, your landlord can take over the PLP account and bill you based on your submeter reading. If there is no separate meter for your unit, you are not responsible for paying for electricity.
It is important to note that some local regulations may require you to have a PLP meter to pass certain inspections, even if you do not have any common spaces that require electricity. For example, in New York City, some residents have reported being told by electricians that they need a PLP meter to pass inspection, even if they plan to use solar power for their outdoor lighting.
If you are unsure about your specific situation, it is always best to consult with a qualified electrician or seek advice from your local utilities provider. They can provide you with accurate information and guidance on PLP meters and any applicable regulations or requirements.
Electrical Signals in the Frontal Lobe: What Does Loss Mean?
You may want to see also
Explore related products
If there is no separate meter for your unit, you are not responsible for paying for electricity
In electrical terms, PLP stands for Public Light and Power. It is a term used in commercial real estate to refer to a common or public meter. In some places, it is also referred to as a "house" meter.
Now, if there is no separate PLP meter for your unit, you are not responsible for paying for electricity. This is because a PLP meter is typically used to measure the electricity consumption of common areas, such as boilers, furnaces, and water heaters. If your unit is not equipped with its own dedicated meter, your landlord is responsible for the electricity charges.
It is important to note that some landlords may incorrectly transfer the PLP account to their tenants, resulting in them potentially paying for the electricity usage of common areas. This practice is illegal, as mentioned by a user on Reddit who encountered a similar issue. In such cases, tenants can request their landlords to install a submeter for their unit or take over the PLP account and bill their tenants based on their submeter readings.
To ensure fairness and accuracy in electricity billing, it is recommended to have separate meters for each apartment or unit. Tenants should be aware of their rights and understand that they are not obligated to pay for electricity if there is no dedicated meter allocated to their unit. By having a separate meter, tenants can monitor and manage their electricity consumption effectively and avoid any disputes over utility charges.
MV Electricity: Understanding Medium Voltage Power Supplies
You may want to see also
Explore related products
In Australia, the common or public meter is called HOUSE
In the context of electricity, PLP stands for PUBLIC LIGHT AND POWER. It is a term used in commercial real estate, specifically in reference to common or public meters. These meters are typically used to power equipment in basements, such as boilers, furnaces, and water heaters.
In Australia, the common or public meter is known as a "HOUSE" meter. This differs from the terminology used in other regions, such as the United States, where PLP is the more common term.
The term "HOUSE" or "house meter" is used to refer to the meter that measures the electricity or gas consumption of an entire house or building. These meters are typically located in a box, either inside or outside the house, and are designed to be safe, although they can deteriorate over time.
In Australia, there are also smart meters, which are digital meters that can transmit energy data to retailers and provide real-time usage information to consumers. These smart meters can be accessed remotely, making it easier for individuals to monitor and manage their energy usage. Additionally, with smart meters, power can be disconnected and reconnected remotely, making it more convenient and cheaper for individuals to move houses.
It is important to note that the terminology for meters can vary between different regions and countries. While "HOUSE" or "house meter" is commonly used in Australia, other terms, such as "PLP," may be used in other parts of the world.
Electric Hybrid Cars: Mild Systems Explained
You may want to see also
Explore related products
In Canada, power utilities derive their power from dams, so meters are referred to as Hydro meters
In electrical terms, PLP stands for PUBLIC LIGHT AND POWER, a term used in commercial real estate. PLP meters power equipment in basements, such as boilers, furnaces, and water heaters.
In Canada, power utilities derive their energy from dams, so meters are referred to as Hydro meters. Hydroelectric power plants are usually located near a water source, such as a river or reservoir. The volume of water flow and the change in elevation determine the amount of energy that can be produced. Canada has embraced hydroelectricity, with some provinces and territories generating over 90% of their electricity from this source. As a result, electric utility names often include the word "Hydro", such as BC Hydro and Ontario Hydro. This widespread usage of the term "Hydro" has led to it becoming a general term for electricity in Canada, regardless of the source.
Hydroelectricity is a significant source of power globally, providing 15% of the world's electricity in 2023. It is a flexible and low-carbon source of energy, making it essential for creating a clean and secure electricity supply. Hydropower facilities with dams and reservoirs can adjust their electricity output in response to demand. While hydropower has environmental benefits, the construction of hydroelectric complexes can also lead to the loss of arable land, population displacement, and disruptions to natural ecosystems.
In conclusion, while PLP stands for Public Light and Power in electrical terminology, in Canada, meters are often referred to as Hydro meters due to the country's reliance on hydroelectric power generated by dams. This widespread usage of the term "Hydro" has influenced how Canadians refer to electricity in general.
Understanding NC: Electrical Control Basics Explained
You may want to see also
